I have a CB77 headlight bucket, and a new headlight, and cannot figure out how to get the two of them to stay together. The headlight goes into the bucket by inserting it sideways, and it fits flush against the inside ot the bucket. I have one of the "unit holder" sort of "W" shaped wires, but there does not seem to ba a place to secure/fasten it to hold anything in place. I have viewed the fichfinder at servicehonda.com, and it is about as helpful as the average computer manual. I am almost at the silicon & extra screws stage. Anyone have any tips?
Terry McKitrick
1966 CP77
Headlight Repair
-
- honda305.com Member
- Posts: 17
- Joined: Fri May 12, 2006 7:33 pm
- Location: St. Albert, Alberta Canada
- Contact:
Headlight Repair
Terry McKitrick
CP1000077, CP77E1000074
St. Albert, Alberta Canada
CP1000077, CP77E1000074
St. Albert, Alberta Canada
-
- honda305.com Member
- Posts: 7817
- Joined: Mon Aug 15, 2005 8:23 am
- Location: KERRVILLE, TEXAS
Re: Headlight Repair
The headlight mounts into the chrome rim with 3 of those "W" parts then the chrome rime is fited from the Top and pull down so the 2 screws can be installed. .....lm[
quote="Terry McKitrick"]I have a CB77 headlight bucket, and a new headlight, and cannot figure out how to get the two of them to stay together. The headlight goes into the bucket by inserting it sideways, and it fits flush against the inside ot the bucket. I have one of the "unit holder" sort of "W" shaped wires, but there does not seem to ba a place to secure/fasten it to hold anything in place. I have viewed the fichfinder at servicehonda.com, and it is about as helpful as the average computer manual. I am almost at the silicon & extra screws stage. Anyone have any tips?
Terry McKitrick
1966 CP77[/quote]
quote="Terry McKitrick"]I have a CB77 headlight bucket, and a new headlight, and cannot figure out how to get the two of them to stay together. The headlight goes into the bucket by inserting it sideways, and it fits flush against the inside ot the bucket. I have one of the "unit holder" sort of "W" shaped wires, but there does not seem to ba a place to secure/fasten it to hold anything in place. I have viewed the fichfinder at servicehonda.com, and it is about as helpful as the average computer manual. I am almost at the silicon & extra screws stage. Anyone have any tips?
Terry McKitrick
1966 CP77[/quote]