Frame Side Grip (Handle)

[Seadog]

Here's today's silly question:

How do you keep the side grip/handle on the left side of the frame from moving? I've tightened it as much as I can and even put rubber tape between it and the frame, but it still rotates after putting the bike on the main stand a few times. The parts lists show some sort of packing under it, but that's long gone.

Any suggestions?

[LOUD MOUSE]

I use 600 grit black wet/dry sandpaper.
I cut it 11/2 inch wide then fold it with the grit out.
Wrap it around the frame tube then install handle. ...................lm

Here's today's silly question:

How do you keep the side grip/handle on the left side of the frame from moving? I've tightened it as much as I can and even put rubber tape between it and the frame, but it still rotates after putting the bike on the main stand a few times. The parts lists show some sort of packing under it, but that's long gone.

Any suggestions?

[Seadog]

Thanks, LM, I'll give it a try.

Edited 7/14 to add:
I tried this and it seems to be working, so far. Thanks again, LM.

I use 600 grit black wet/dry sandpaper.
I cut it 11/2 inch wide then fold it with the grit out.
Wrap it around the frame tube then install handle. ...................lm

[dragonfly888]

Thanks for the tip... I have had a similar problem !

[LOUD MOUSE]

You are welcome. .................lm

Thanks for the tip... I have had a similar problem !