another noob to the vintage hondas

drewvdubber · Post by **drewvdubber** » Thu Jul 24, 2008 11:13 pm

well i just picked up my cb77. im in love.

was wondering if someone can help me out with the serial numbers to verify its age.

frame- cb771014641

engine- cb77e1031360

thanks for the help in advance. also any help with great online sellers of parts like cables etc.

drew

LOUD MOUSE · Post by **LOUD MOUSE** » Thu Jul 24, 2008 11:44 pm

Frame is a 1965 and engine is a 1966. ............lm

drewvdubber wrote:well i just picked up my cb77. im in love.

was wondering if someone can help me out with the serial numbers to verify its age.

frame- cb771014641

engine- cb77e1031360

thanks for the help in advance. also any help with great online sellers of parts like cables etc.

drew

drewvdubber · Post by **drewvdubber** » Thu Jul 24, 2008 11:57 pm

thanks for the super fast response.

davomoto · Post by **davomoto** » Fri Jul 25, 2008 12:56 pm

Drew, welcome to the forum! Here's some links for parts.

davomoto

http://www.olypen.com/retro/

http://www.classichondarestoration.com/ ... _Parts.php

http://www.westernhillshondayamaha.com/

http://www.ohiocycle.com/

drewvdubber · Post by **drewvdubber** » Sat Aug 02, 2008 3:59 pm

i need to get new cables, th cables that are on here, are for the taller bar. this has the flat bar. with the cables routed now, the controls are difficult to use.

where can i find them

what is the bulb number for the tail ight? it is missing.

what about the brake switch spring?

stater chain is worn out, stater chain makes a ton of noise and slips. where can another one be had?

where is a good place to find vintage grips?

how about vintage white wall tires?

i have taken off all the tins to send out for paint. i tore down all the controls and disassembled them to polish them. 4 hours in front of a polishing wheel and they look great. ill post pictures later.

the case covers i would like to take off and polish as well. what can i expect to run into there if i was to take them off. the oil has been drained.

the carbs need to be rebuilt, i have a buddy that used to race vintage ducatis coming over to help me with that.

where can i get the solid core plug wires besides hot rod sites?

sorry for all the questions, but the bike shops here dont seem to want to deal with me.

drewvdubber · Post by **drewvdubber** » Sat Aug 02, 2008 3:59 pm

also can the gasket below the speedo b replaced or do i have to make one?

honda305.com Forum

honda305.com Forum

another noob to the vintage hondas

another noob to the vintage hondas

Re: another noob to the vintage hondas