How do you disassemble the horn?

big-b · Post by **big-b** » Thu Feb 25, 2010 9:54 pm

How do you get the horn apart for painting?

Brian

Gunner_CAF · Post by **Gunner_CAF** » Thu Feb 25, 2010 10:15 pm

Remove the cover, you will see the screws that hold the bracket under the cover. There are some good pictures in this post:

http://www.honda305.com/forums/viewtopi ... light=horn

Gunner

big-b · Post by **big-b** » Fri Feb 26, 2010 8:51 am

The horn is off the bike, i'm wondering how to get the cover off? These pictures don't show how to get the cover off. I removed the mounting bracket and took the nuts off the two screws under the bracket. Are there some clips or something that need to be removed? Mayb it's just stuck together from sitting so long?

Brian

LOUD MOUSE · Post by **LOUD MOUSE** » Fri Feb 26, 2010 9:42 am

Ya pry/pop the top off. ............lm

big-b wrote:The horn is off the bike, i'm wondering how to get the cover off? These pictures don't show how to get the cover off. I removed the mounting bracket and took the nuts off the two screws under the bracket. Are there some clips or something that need to be removed? Mayb it's just stuck together from sitting so long?

Brian

big-b · Post by **big-b** » Fri Feb 26, 2010 10:14 am

Thanks, i'll give it a try when i get home from work.

Brian

LOUD MOUSE · Post by **LOUD MOUSE** » Fri Feb 26, 2010 10:50 am

Ya welcome.
I'd say that if it works well and all ya want is to paint it I'd do it in one piecel (assembled). ....lm

big-b wrote:Thanks, i'll give it a try when i get home from work.

Brian

big-b · Post by **big-b** » Fri Feb 26, 2010 11:06 am

That might be the best way to do it. I do want to replace the grommet where the wires come through, it's all dried out and i expect water will get in there.

Brian