1966 dream, blackened plugs...

sky1haze · Post by **sky1haze** » Mon Sep 13, 2010 7:39 pm

I have a problem with my plugs getting all fowled up, turning really black and having to be replaced every-every other day........any suggestions....
Oh yeah, It backfired a few times today while trying to start it....

brewsky · Post by **brewsky** » Mon Sep 13, 2010 8:21 pm

Clean the carb (all jets and passages), adjust the float and idle, check air filter, adjust the valves, adjust cam chain, check timing, then go from there if necessary.

Had a similar prob with mine in the beginning...turned out I was setting the float to the wrong spec.
Correct setting is 26.5 mm from gasket surface of carb body.

sky1haze · Post by **sky1haze** » Mon Sep 13, 2010 9:19 pm

thank-you so much, as a beginner, this seems to be a big project.....Time to learn!

sky1haze · Post by **sky1haze** » Mon Sep 27, 2010 1:42 pm

do you have a simple way, or know where I can go to learn how to adjust my valves??

honda305.com Forum

honda305.com Forum

1966 dream, blackened plugs...

1966 dream, blackened plugs...