Brewsky--LOUDMOUSE--HELP

ggarton · Post by **ggarton** » Thu May 21, 2015 10:59 am

Help--Need Jet,needle #16133-259-004 and needle,jet #16151-266-004. Ohio cycle does not have. Any idea where to get best ???

brewsky · Post by **brewsky** » Fri May 22, 2015 6:36 am

The needle JET, (one with hole in it), I got from Fast Fred on this site.

Had no luck with the jet NEEDLE anywhere, and just used the original.

The Keyster kit I got had a D3 Needle and looks mostly identical (except for clip slot widths) to the original Keihin, but never used it.

If yours are not damaged or obviously worn, I would use the originals.

ggarton · Post by **ggarton** » Fri May 22, 2015 8:55 am

I ordered the keyster yesterday, My carb guy tells me I really need them. Just wondered if there might be better ones out there.

brewsky · Post by **brewsky** » Fri May 22, 2015 9:21 am

The Keihins are best, but hard to find.... you will probably be ok with the Keyster for the Dream.

Watch the jet sizes if you buy the kit...correct is 120 main and 35 slow.

My kit came with 130 main and 40 slow and was way too rich.

LOUD MOUSE · Post by **LOUD MOUSE** » Sat May 23, 2015 10:51 am

I sent you 2 PM so I could save you the $$$ on the KEYSTER KIT for the carb you have.
The only things in the kit you ordered you can use are the rubber parts and float needle.
You have my number so call me and I'll be happy to discuss the carb. ..............lm

ggarton wrote:I ordered the keyster yesterday, My carb guy tells me I really need them. Just wondered if there might be better ones out there.

ggarton · Post by **ggarton** » Sat May 23, 2015 8:26 pm

Sorry guys, I just got a handle on this PM thing. Had a message from CONBS from back in Feb, Loud Mouse got your #, will try and call Monday or Tuesday, I have (3) 300 Dreams that I do ride so I need all the help I can get. Also have (2) parts bike. Thanks for the help.

Honda305.com Forum

honda305.com Forum

Brewsky--LOUDMOUSE--HELP

Brewsky--LOUDMOUSE--HELP

jets