Instructions for Buco saddlebag hardware wanted

Eljeef · Post by **Eljeef** » Thu Oct 01, 2009 3:35 pm

Hello. Does anyone have instructions for mounting the hardware for Buco saddlebags? If you have a set of twinmasters or other Buco bags would you be able to post some photos of the hardware mounted on your Dream without the saddlebags so I could figure out the mounting points? I recently purchased the mounting hardware for what was supposed to be for BSA/Honda. When I got it in the original box it said #44 mount, BSA. Thansk for any help, Jeff.

Buck · Post by **Buck** » Sat Oct 03, 2009 6:38 am

Go to the forum home page and click on the picture on the right of the saddle bags. The next page will have a picture of my white CA77 with Buco bags and scroll down.There is a copy of the Buco mounting diagram showing mounting kit as used. Buck

Eljeef · Post by **Eljeef** » Sat Oct 03, 2009 6:09 pm

Buck wrote:Go to the forum home page and click on the picture on the right of the saddle bags. The next page will have a picture of my white CA77 with Buco bags and scroll down.There is a copy of the Buco mounting diagram showing mounting kit as used. Buck

Hello. I cannot click on the picture of the rider in black gear on the black bike. Could you elaborate?

Buck · Post by **Buck** » Sat Oct 03, 2009 8:17 pm

Go to the page that says Welcome at the top. There are 5 pictures in a line.The far right picture is the rear of a superhawk with baby Buco bags.Click on that picture and when the white Dream with bags comes up,click on to it and scroll down.

Eljeef · Post by **Eljeef** » Sun Oct 04, 2009 12:09 am

Thanks Buck. I found it. I was looking on the forum home page and not the 305.com Homepage. My hardware is #44 though I'm sure I could fab it to fit when the time comes and I actually get the Twinmasters. Regards, Jeff.

Nick · Post by **Nick** » Sun Oct 18, 2009 10:50 pm

The upper mount bolts to the bike in two places: upper shock mount, and via a bolt through the rear fender/aluminum fender stay. That's it. Everything else just hangs down and is free to move.

Eljeef · Post by **Eljeef** » Mon Oct 19, 2009 2:33 am

Nick wrote:The upper mount bolts to the bike in two places: upper shock mount, and via a bolt through the rear fender/aluminum fender stay. That's it. Everything else just hangs down and is free to move.

Thanks for that. Jeff.

Honda305.com Forum

honda305.com Forum

Instructions for Buco saddlebag hardware wanted

Instructions for Buco saddlebag hardware wanted