Steering Bearings

Sascha · Post by **Sascha** » Thu Jan 20, 2011 11:23 am

Has anyone ever come across steering bearings for a CA77 that are enclosed instead of those little BB's?

-Sascha

Hahnda · Post by **Hahnda** » Thu Jan 20, 2011 5:05 pm

This one should work.

SSH750

http://www.z1enterprises.com/detail.aspx?ID=1503

May find them cheaper if you search around.

Sascha · Post by **Sascha** » Fri Jan 21, 2011 1:13 pm

Are you certain that will fit correctly - No modification required?
-sascha

Hahnda · Post by **Hahnda** » Fri Jan 21, 2011 1:18 pm

You may need to do some shimming but those are the correct diameter. You could double check your dimensions to those of the bearings before ordering.

48.5 X 26 X 15
&
50 X 30 X 14.5
are the size of the bearings

Sascha · Post by **Sascha** » Mon Jan 24, 2011 1:14 pm

Has anyone else tried this replacement?

Hahnda · Post by **Hahnda** » Mon Jan 24, 2011 4:57 pm

I have used them on a superhawk but not a dream.

rrietman · Post by **rrietman** » Fri Jan 28, 2011 10:18 pm

S; I just yesterday replaced the steering bearings on a CL77 with tapered bearings from "All Balls". the kit #22-1011 fit perfectly using the 3mm shim supplied. I thought of you and drug out a 305 dream frame, knocked out the bearings and measured. they are the same as the CL77/CB77. so the nuts of it is that the AllBalls kit #22-1011 will work on the 305 dream frame
Good luck
Randy

Honda305.com Forum

honda305.com Forum

Steering Bearings

Steering Bearings