honda305 Home honda305 Auctions honda305 Gallery honda305 Forum


honda305.com Forum

Login
□ Search
□ FAQ 
□ 
Vintage Honda Owners,
Restorers, Riders and
Admirers

Gunson Colortune / 14mm Adapter

JC56, JC57, C70, C71, CB71, CE71, CS71, CSA71, CS72, CSA72, C75, C76, CA76, CS76, CSA76, CS77, CSA77, CB92, CA95
Post Reply
Dr. Frankenstein
honda305.com Member
Posts: 568
Joined: Tue Feb 02, 2010 7:11 pm
Location: Charlottesville, VA

Gunson Colortune / 14mm Adapter

Post by Dr. Frankenstein » Sat Aug 26, 2017 6:17 am

Does anybody have a Gunson Colortune, and does it work?

The concept looks pretty cool, and everything online is inconclusive, but after much research I pulled the trigger anyway.

I bought the 12mm one, which should fit my CA's, but I don't know if I need a 'long-reach' 12mm one for the CA's I have; any ideas?

Does anybody know the difference between a 14mm and 14mm 'taper' adapter?

I'm also hunting a 12mm into 14mm adapter for the aforementioned Colortune, if anybody has one they don't want or need.

DJM
honda305.com Member
Posts: 553
Joined: Thu Oct 09, 2003 1:54 pm
Location: Chesterfield UK

Post by DJM » Sat Aug 26, 2017 3:45 pm

Did you buy it from an Antique Shop?

Seriously I'm amazed that they are still around, I had one well around forty-five years ago, bought it to use on my van, couldn't afford a car back then.

From what I recall, the results ( indications?) were pretty inconclusive and don't remember what I did with it! Never tried it on a bike, can't even remember if I was riding one at that time. Let us now how you get on with it, perhaps I should look round and find another 12mm one as I still have a Cb77 and CL77 in the garage!

e3steve
h305 Moderator
Posts: 2601
Joined: Fri Oct 31, 2003 1:38 pm
Location: Mallorca, Spain & Warsash, UK

Post by e3steve » Sun Aug 27, 2017 5:44 am

Member 'spargett' (Scott) has used one with a fair degree of success. Suggest you PM him...

Dr. Frankenstein
honda305.com Member
Posts: 568
Joined: Tue Feb 02, 2010 7:11 pm
Location: Charlottesville, VA

Post by Dr. Frankenstein » Wed Aug 30, 2017 6:51 am

Thanks guys, I will...

No, DJM, they're still making them. I ordered a 12mm for my CA's, but of course my other bikes take a 14mm spark plug, which they either don't make anymore or are hard to find; and I just picked up an inline-four '78 KZ650, so I'm thinking I'm going to need one.

They look pretty cool, and seem (according to research) take a lot of the guess work out of where to put the A/F screw, so I thought I'd try it.

Post Reply




 

CB-77 | CYP-77 | Road Test | Riding Log | Literature | Zen | Marketplace | VJ Survey | Links | Home