ca77 neutral switch/ stator
ca77 neutral switch/ stator
Can anyone please tell me how to check the neutral switch and the stator to make sure they are working? I am putting bike back together and need to make sure they are good. Thanks!
The neutral switch will show a direct connection to ground (the engine case) when in neutral and an open circuit when not in neutral.
There is a resistance reading somewhere in the service manual that you should measure between each wire - sorry but I don't have the number handy - and there should be no connection between any wire and ground.
There is a resistance reading somewhere in the service manual that you should measure between each wire - sorry but I don't have the number handy - and there should be no connection between any wire and ground.
-
- honda305.com Member
- Posts: 14
- Joined: Thu Apr 11, 2013 7:15 am
- Location: South Carolina, USA
Neutral Switch
I want to remove the Neutral Switch from my 1965, 305 Dream. If i unplug it then remove the 2 bolts, will i have to reset somthing to put it back together. Will it just go back in.
-
- honda305.com Member
- Posts: 7817
- Joined: Mon Aug 15, 2005 8:23 am
- Location: KERRVILLE, TEXAS
Re: Neutral Switch
Align the rod on the switch with the slot in the shift drum then install the 2 screws. (no washers). ............lm
Backyard wrote:I want to remove the Neutral Switch from my 1965, 305 Dream. If i unplug it then remove the 2 bolts, will i have to reset somthing to put it back together. Will it just go back in.