Wanted: Luggage Rack for 305 Dream
Wanted: Luggage Rack for 305 Dream
Looking for a rear mount luggage rack for my 305 CA77. Currently have the factory long 2 person seat installed. Any condition OK, will re-chrome if needed. Best way to respond is email: stencel99@yahoo.com. Thank you!
Replied by email
Check your email 73Ghia. There's a guy in Lewisville, TX that may be able to help you out.
Trust, but verify. -Ronald Reagan
1970 CT70, 1979 CB550
1999 ZG1000 Concours
1961 Dream Sport, 1965 Dream Touring
1997 BMW R1100RT
1970 CT70, 1979 CB550
1999 ZG1000 Concours
1961 Dream Sport, 1965 Dream Touring
1997 BMW R1100RT
-
- honda305.com Member
- Posts: 3
- Joined: Tue Jun 16, 2015 5:00 pm
- Location: Swalmen, Netherlands
Luggage rack
I have a Dream luggage rack, that i bought for my C71, but it doesn't fit. I don't know for which Dream it is.
I don't know if you still need it?
I don't know if you still need it?
- Attachments
-
- Bag.rek Dream.JPG (232.84 KiB) Viewed 4072 times
-
- honda305.com Member
- Posts: 144
- Joined: Sun Aug 16, 2009 1:53 am
- Location: Palo Alto, CA
Rack
Erik do you still have this? I have been looking for one for a while. If you do have it, could you measure the distances between the places where the dream fits inside of the rack, that is, the distances between the bolt holes?
'64 CA77 305 Dream
-
- honda305.com Member
- Posts: 3
- Joined: Tue Jun 16, 2015 5:00 pm
- Location: Swalmen, Netherlands
luggage rack dream
Hello,
sorry about the late reply, i was away for two weeks.
I still have the luggage rack. It looks like NOS, and was never fitted.
It has a little rust around some of the welds, and someone has painted silver over that.
It measures 27 cm between the front mounting points, and 14 cm between the rear.
The distance between the front and rear holes is 25 cm.
Erik
sorry about the late reply, i was away for two weeks.
I still have the luggage rack. It looks like NOS, and was never fitted.
It has a little rust around some of the welds, and someone has painted silver over that.
It measures 27 cm between the front mounting points, and 14 cm between the rear.
The distance between the front and rear holes is 25 cm.
Erik
-
- honda305.com Member
- Posts: 15
- Joined: Wed May 27, 2015 11:52 pm