Steverino's CB77

Steverino · Post by **Steverino** » Sun Feb 15, 2015 2:07 am

CB77 left rear photo a few hours into disassembly. I am very pleased with how easily this bike is coming apart.

15 - 1 (2) by stevesteverinomeister, on Flickr

G-Man · Post by **G-Man** » Sun Feb 15, 2015 2:40 am

Looks like you got the swingarm pivot out....

G

Steverino · Post by **Steverino** » Sun Feb 15, 2015 3:47 am

No such luck G-Man. It's obscured by the grease I'm applying. The good news is I'm still on the first of the three P's.

G-Man · Post by **G-Man** » Sun Feb 15, 2015 10:14 am

Can you turn it?

G

Steverino · Post by **Steverino** » Sun Feb 15, 2015 12:25 pm

Yes it turns with tolerable resistance. No binding or seizing.

G-Man · Post by **G-Man** » Sun Feb 15, 2015 2:34 pm

Sounds like it should move ... Good luck with the 2nd and 3rd 'P'... :-)

G

Steverino · Post by **Steverino** » Wed Feb 18, 2015 10:54 pm

I had to use a Harley hammer to drive out the swing arm bolt. I will definitely use a press to reinstall it.
Here is the bare frame. I've got a shop close by that specializes in industrial coatings and they do very nice work. They sandblasted and powder coated my last CB160 frame for around 150 dollars. They can do a medium gloss black or a high gloss. I still don't understand how glossy these frame were when new. Since I am rechroming and polishing, I should probably go with the hi gloss, right?

15 - 1 (3) by stevesteverinomeister, on Flickr

Honda305.com Forum

honda305.com Forum

Steverino's CB77