Posted: Tue May 29, 2018 2:43 pm
Nice job! Looks great.
Vintage Honda Owners, Restorers, Riders and Admirers
https://www.honda305.com/forums/
https://www.honda305.com/forums/viewtopic.php?f=41&t=7633456
OldStan wrote:Didn't realize how long since I'd been off the forum. Put 500 or so miles on the bike the last couple of months with no issues. The clutch had always slipped if I really got on it hard when shifting, doesn't now. Changed to 10W40 Valvoline MC oill, was using 20W50 synthetic MC oil. I also made 2 spacers for the springs about 2mm thick, putting them on opposite springs. I had them on all 4 but that made the clutch pull too hard. With two I barely notice the difference in pull. The tire hop is gone so all is good.
Even got myself fixed, had wrist surgery in January and it's slowly returning to something close to normal.