oil filter

ryan_siefrin · Post by **ryan_siefrin** » Sun May 22, 2005 8:52 pm

hello, i'm in the process of restoring my bike, and i was wondering about the oil filter and what i coud do with it. is there anything i can do for it? i'm sure i's been in the bike for many years. thanks, Ryan

DVM · Post by **DVM** » Wed Jul 27, 2005 5:48 pm

Hi, My old 65 cb77 used a centrifugal oil filter, chain driven. I would simply take it apart (metal ring holds the cover plate) and clean the inside wall. Hope this helps.

ryan_siefrin · Post by **ryan_siefrin** » Fri Jul 29, 2005 7:40 am

sure, thanks.

djbarcy · Post by **djbarcy** » Tue Sep 27, 2005 1:51 pm

What is the thickness of the thrust washer that goes between the filter and the case? I will need to manufacture my own.

LOUD MOUSE · Post by **LOUD MOUSE** » Tue Sep 27, 2005 2:39 pm

It is stainless and about .002. Be sure you put it on the shaft before the filter. ...........LM

djbarcy · Post by **djbarcy** » Tue Sep 27, 2005 2:41 pm

Thanx Will do dan

Tom W. · Post by **Tom W.** » Mon Oct 03, 2005 9:05 am

DJBarcy: Just curious how you are planning to make that. .002 (inch I assume) is about as thick as foil. Punch out the hole and tin snips for the outside diameter? Tom

Honda305.com Forum

honda305.com Forum

oil filter

oil filter

Re: oil filter

Re: oil filter

Re: oil filter

Re: oil filter

Re: oil filter

Re: oil filter