honda305.com Forum

Vintage Honda Owners, Restorers, Riders and Admirers

Latest Registry Entry
1965 Honda CP77 — Ulsan Metro City, Rep. Korea
Restored with original parts — Owner: J. Doe

washer

Post Reply
cac
honda305.com Member
Posts: 24
Joined: Sun Sep 06, 2009 8:25 am
Location: Racine wis.

washer

Post by cac » Mon Sep 14, 2009 12:21 pm

I may or may not have dropped a washer down the spark plug hole when taking the points apart. Being a bike that hasn't been run since 1973 there has been some replacement parts here and there ,there was one additional washer on the other point so I am curious if I screwed up.The motor has been turned over quite a few times before discovering it. Any suggestions, Honda 305. Thanks Chris
I'm hooked on the resto project!!!!
Top
User avatar
305
honda305.com Member
Posts: 190
Joined: Sat Oct 07, 2006 4:53 pm
Location: southern mn

Post by 305 » Mon Sep 14, 2009 12:36 pm

i would try to find someone with a flexible borescope
Top
sprocket
honda305.com Member
Posts: 50
Joined: Mon Dec 29, 2003 11:46 am
Location: Fayetteville, Pa

washer

Post by sprocket » Mon Sep 14, 2009 5:21 pm

Hope that it is magnetic and fish around with a magnet on a flexable shaft,
Top
cribbs74
honda305.com Member
Posts: 135
Joined: Sun Jul 09, 2006 3:42 pm
Location: Cibolo TX

Post by cribbs74 » Fri Sep 18, 2009 12:14 pm

Cac,

I thought I did the same thing a while back, the washer turned up betwen one of the cooling fins.
Ron Cribbs
1966 CL77
1965 CB160
1974 Triumph T150V
Top
Post Reply

Return to “Motors - 247cc | 305cc | 337cc | 350cc”