CA77 Head Sealing Washers?

[big-b]

Maybe someone could label this pictures as to which ones require a sealing washer?

[LOUD MOUSE]

5 6 9 . .....lm

Maybe someone could label this pictures as to which ones require a sealing washer?

[big-b]

Thank You.

Brian

[mca2]

I've noticed oil drops under my '67 CB77. Closer inspection showed some leakage along a the threads of a stud (see picture). If i look at the above pictures this should be position 3?

Any suggestion how to fix this? And does anyone know where the oil's coming from anyway?

[rrietman]

really? isn't it 5-6-3?
maybe I don't know anything
Randy

[LOUD MOUSE]

Do I see a Bolt rather than a Nut near this leak?
The location as I can tell will require a soft washer/seal "HONDA ALUMINUM" and the Special sort of NUT. .............lm

I've noticed oil drops under my '67 CB77. Closer inspection showed some leakage along a the threads of a stud (see picture). If i look at the above pictures this should be position 3?

Any suggestion how to fix this? And does anyone know where the oil's coming from anyway?

[mca2]

Do I see a Bolt rather than a Nut near this leak?
The location as I can tell will require a soft washer/seal "HONDA ALUMINUM" and the Special sort of NUT. .............lm

I'll see if i can get my hands on this special nut. I've studied my original shop manual and parts list, but it is nearly impossible to spot which nut goes where. But the oil drops seem to prove that at least this one requires such a nut :)

And yes, the other looks like a bolt. I assume someone found out, a bolt instead of a rod and nut also works. And apart from this leak, it otherwise seems oil tight.