Questions about jets and excess oil...

Snakeoil · Post by **Snakeoil** » Mon Apr 25, 2011 12:02 pm

Nice. When I was speaking to Terry at Western Hills one day, I asked if he sold Keyster kits. He said no and they were a PIA and then said, "Why you you think they named them Keister?".

regards,
Rob

LOUD MOUSE · Post by **LOUD MOUSE** » Mon Apr 25, 2011 12:26 pm

I have been using the CB77 kit for over 10 years and never a problem.
BTW jut try to get a REAL HONDA kit for these bikes. ..............lm

Snakeoil wrote:Nice. When I was speaking to Terry at Western Hills one day, I asked if he sold Keyster kits. He said no and they were a PIA and then said, "Why you you think they named them Keister?".

regards,
Rob

Snakeoil · Post by **Snakeoil** » Mon Apr 25, 2011 4:43 pm

I hear you, LM. If that's all there is, then that's all there is. When I first got my CL77 and read posts about the Keyster kits not always being right, I did a little research and found out that if you ask, you can find out which jets are in which kits. I believe it was the CB77 kit that had the right jets.

I thought about trying to make pair of new needles based on the dimensions I measured from my stock needles. I have a taper attachment on my lathe, although the compound should provide sufficient travel for the short length of taper on those needles. Might try it some rainy day.

regards,
Rob

brewsky · Post by **brewsky** » Mon Apr 25, 2011 6:50 pm

Is it possible to find individual Keyster needles and jets from some supplier?

I have been looking for a list of Keyster parts, and charts showing needle dimensions vs needle numbers etc. with no luck.

My Dream kit came with D3, I think the CB or CL's are D9?, and my CB750's are D17, but I don't know the differences...except the D17's are longer?

MBellRacing · Post by **MBellRacing** » Mon Apr 25, 2011 6:56 pm

I'd just really like some more options on jets. My neighbor gave me a TON of jets, including a Honda Motors racing jet plate holder thing, but NONE are 132 or 135's!!! I need them!!!

brewsky · Post by **brewsky** » Mon Apr 25, 2011 7:31 pm

MBellRacing wrote:I'd just really like some more options on jets. My neighbor gave me a TON of jets, including a Honda Motors racing jet plate holder thing, but NONE are 132 or 135's!!! I need them!!!

Do you have a ton of jets with the old pitch?

If so how about a 115? or 117.5?....if so I would be interested

Worst case you could try drilling out a smaller size

GG · Post by GG » Mon Apr 25, 2011 7:35 pm

Hi MBell - there is a site that seems to have a lot of Keihin jets and needles. Try out:

http://www.carbparts.com/

GG

Honda305.com Forum

honda305.com Forum

Questions about jets and excess oil...

Keihin jets and needles