honda305 Home honda305 Auctions honda305 Gallery honda305 Forum


honda305.com Forum

Login
□ Search
□ FAQ 
□ 
Vintage Honda Owners,
Restorers, Riders and
Admirers

tachometer cable on cb77

waynew
honda305.com Member
Posts: 33
Joined: Tue Aug 03, 2010 8:38 am
Location: hawkinsville ga

tachometer cable on cb77

Post by waynew » Sat Sep 25, 2010 6:59 am

when changing out my tachometer cable i tried to loosen the 17mm nut where the cable goes into the engine but it seems stuck. does the phillips head screw located nearby the nut have to be loosen? also, when the cable broke the engine is making a wierd noise at the place where the cable goes into the engine. all advice would be appreciated. thanks!

User avatar
davomoto
honda305.com Member
Posts: 2508
Joined: Sat Nov 18, 2006 7:36 pm
Location: Marin County CA

Post by davomoto » Sat Sep 25, 2010 10:54 am

Phillips head need not be loosened. Wird noise is most likely the broken cable whitrling in the housing.
davomoto
64 CB77
63-7 CB77 Cafe'
67 CL77
64 CL72
66 CL77 big bore flat tracker
Many others!

waynew
honda305.com Member
Posts: 33
Joined: Tue Aug 03, 2010 8:38 am
Location: hawkinsville ga

Post by waynew » Sun Sep 26, 2010 7:20 am

thanks i appreciate that. have a good one.

dragonfly888
honda305.com Member
Posts: 48
Joined: Fri Jul 16, 2010 8:35 am
Location: Burlington, Ontario, Canada

Post by dragonfly888 » Sun Feb 01, 2015 11:50 pm

I, too, am having problems loosening the nut where the Tach Cable goes into the engine. Can anyone suggest how to do this? Thanks very much.

User avatar
G-Man
honda305.com Member
Posts: 5678
Joined: Wed Mar 25, 2009 5:17 pm
Location: Derby, UK
Contact:

Post by G-Man » Mon Feb 02, 2015 3:18 am

Penetrating oil, heat and patience......

Put a bit of heat on there and just try working the nut back and forwards. Try not to squash the nut.

G
'60 C77 '60 C72 '62 C72 Dream '63 CL72
'61 CB72 '64 CB77 '65 CB160
'66 Matchless 350 '67 CL77
'67 S90 '77 CB400F

dragonfly888
honda305.com Member
Posts: 48
Joined: Fri Jul 16, 2010 8:35 am
Location: Burlington, Ontario, Canada

Post by dragonfly888 » Wed Feb 04, 2015 12:13 pm

Wondering... does this nut have a standard or reverse thread?
Also... do you think it would be better to remove the Tach Drive Ass'y to attempt removal of the nut?
I am also wondering about the availability of the nut that attaches the Tach Cable to the Tach Drive Ass'y.
Thanks!
_________________
1966 CP77 305 Super Hawk
Burlington, Ontario Canada

LOUD MOUSE
honda305.com Member
Posts: 7817
Joined: Mon Aug 15, 2005 8:23 am
Location: KERRVILLE, TEXAS

Post by LOUD MOUSE » Wed Feb 04, 2015 12:49 pm

Standard thread.
Leave it on the head as it holds the assy for better grip.
The nut you describe is assembled to the cable and should not be removed.
Have you scared or marked up the nut?. ............lm

dragonfly888 wrote:Wondering... does this nut have a standard or reverse thread?
Also... do you think it would be better to remove the Tach Drive Ass'y to attempt removal of the nut?
I am also wondering about the availability of the nut that attaches the Tach Cable to the Tach Drive Ass'y.
Thanks!

Post Reply




 

CB-77 | CYP-77 | Road Test | Riding Log | Literature | Zen | Marketplace | VJ Survey | Links | Home