Restaking the screws on the rotor

silverclerk@gmail.com · Post by **silverclerk@gmail.com** » Wed Jan 12, 2011 7:15 pm

Hey all,
I took the rotor off because I thought the rollers weer getting stuck and preventing the motor from turning. Since I had it off anyway I decided to take it apart, now I have to restake those screws on the back of the rotor but am unsure of how to do it. Is it as simple as taking a cold chisel and hitting those screws at an angle? I am afraid of knocking the magnetism out of my rotor. Gracias amigos

Wilf · Post by **Wilf** » Thu Jan 13, 2011 1:49 am

I staked my starter clutch screws just as you describe and I can't see that I've lost any generator power.

Wilf

silverclerk@gmail.com · Post by **silverclerk@gmail.com** » Thu Jan 13, 2011 6:01 pm

Thanks homes! You're a gentleman and a scholar, appreciate the reply!

Wilf · Post by **Wilf** » Thu Jan 13, 2011 6:14 pm

You're welcome! Just remember to keep your cold chisel aligned with magnetic north when you smack it. :)

Wilf

Honda305.com Forum

honda305.com Forum

Restaking the screws on the rotor

Restaking the screws on the rotor