Right crank case cover screws

davomoto · Post by **davomoto** » Sat Nov 26, 2011 1:08 pm

The bolt with the phillips head is the correct one.

Davo

Kigsby · Post by **Kigsby** » Sat Nov 26, 2011 6:16 pm

Really? That's good, but I wonder why all the ones I found for sale look like the other one. I went to a really good nut and bolt warehouse today, and the guy made me one for $10!

48lesco · Post by **48lesco** » Sat Nov 26, 2011 6:47 pm

Again - Why not just order the right screws from Honda? The 115mm screw retails for $1.16 and you can get it online for 70 cents. I wouldn't order it online by itself, but geez, don't pay to have one made.

http://www.hondapartsnow.com/genuine/ho ... 06115.html

Kigsby · Post by **Kigsby** » Sat Nov 26, 2011 7:08 pm

I went to a Honda dealer and bought all the screws for both crank cases. They said that one wasn't available any more. In the parts book, it shows the part # as 90089-259-000 Bolt, left leg shield under. The link you showed is for a CB77 but it looks like the bolt I need. I'm just confused because the parts book screw (# 19 in the picture) looks nothing like the one I pulled off the bike. It isn't a pan head screw. It looks like a bolt with a nut at the end.

LOUD MOUSE · Post by **LOUD MOUSE** » Sat Nov 26, 2011 8:03 pm

That is for a place to mount the Crash Bar. ...........lm

Kigsby wrote:I went to a Honda dealer and bought all the screws for both crank cases. They said that one wasn't available any more. In the parts book, it shows the part # as 90089-259-000 Bolt, left leg shield under. The link you showed is for a CB77 but it looks like the bolt I need. I'm just confused because the parts book screw (# 19 in the picture) looks nothing like the one I pulled off the bike. It isn't a pan head screw. It looks like a bolt with a nut at the end.

Kigsby · Post by **Kigsby** » Sat Nov 26, 2011 8:08 pm

Thank you Loud! That was driving me crazy! I didn't know if the part book was wrong or if the bolt that was in there was wrong. I couldn't figure out why they would use a bolt with threads showing instead of a pan head. I'm going to order the 6x115 panhead screw.

brewsky · Post by **brewsky** » Sat Nov 26, 2011 8:14 pm

Kigsboy wrote:Thank you Loud! That was driving me crazy! I didn't know if the part book was wrong or if the bolt that was in there was wrong. I couldn't figure out why they would use a bolt with threads showing instead of a pan head. I'm going to order the 6x115 panhead screw.

Please let us know if they actually have it...thanks

Honda305.com Forum

honda305.com Forum

Right crank case cover screws