Want to keep a Restoration Log? Post it here! You can include photos. Suggested format: One Restoration per Thread; then keep adding your updates to the same thread...
-
cmineo
- honda305.com Member
- Posts: 127
- Joined: Sat Oct 11, 2014 7:04 am
- Location: lehigh valley pa
Post
by cmineo » Mon May 30, 2016 8:10 am
the rear was rough ... but it is cleaning up for the most part. Chrome and wet basements dont mix well
-
Attachments
-
- image.jpeg (150.74 KiB) Viewed 2361 times
-
cmineo
- honda305.com Member
- Posts: 127
- Joined: Sat Oct 11, 2014 7:04 am
- Location: lehigh valley pa
Post
by cmineo » Mon May 30, 2016 8:20 am
the ends of these are rotten around the baffles ... i was able to save the baffles and plan cleaning these up as much as possible
-
Attachments
-
- image.jpeg (107.13 KiB) Viewed 2360 times
-
cmineo
- honda305.com Member
- Posts: 127
- Joined: Sat Oct 11, 2014 7:04 am
- Location: lehigh valley pa
Post
by cmineo » Mon May 30, 2016 8:22 am
these are the tank badges, plastic covered tin ones and they cleaned up very nicely. no damage or cracks.
-
Attachments
-
- image.jpeg (90.5 KiB) Viewed 2359 times
Last edited by
cmineo on Mon May 30, 2016 9:53 am, edited 1 time in total.
-
cmineo
- honda305.com Member
- Posts: 127
- Joined: Sat Oct 11, 2014 7:04 am
- Location: lehigh valley pa
Post
by cmineo » Mon May 30, 2016 8:24 am
the tank chrome is nice too ... no real scratches and only a few tiny dents that i can fix ...
-
Attachments
-
- image.jpeg (86.89 KiB) Viewed 2367 times
-
LOUD MOUSE
- honda305.com Member
- Posts: 7818
- Joined: Mon Aug 15, 2005 8:23 am
- Location: KERRVILLE, TEXAS
Post
by LOUD MOUSE » Mon May 30, 2016 9:36 am
The badges you show are metal ones painted with enamel and are the ones HONDA replaced the original resin ones that came on the bike. ................lm
cmineo wrote:these are the original tank badges, plastic covered tin ones and they cleaned up very nicely. no damage or cracks.
-
cmineo
- honda305.com Member
- Posts: 127
- Joined: Sat Oct 11, 2014 7:04 am
- Location: lehigh valley pa
Post
by cmineo » Mon May 30, 2016 9:52 am
i did notice these were completely different than my other completely plastic ones i have on my other dreams .... i didnt realize Honda reproduced these to replace the original ones. they look decent and are larger than the current reproductions i bought for my black dream project ...
-
LOUD MOUSE
- honda305.com Member
- Posts: 7818
- Joined: Mon Aug 15, 2005 8:23 am
- Location: KERRVILLE, TEXAS
Post
by LOUD MOUSE » Mon May 30, 2016 10:04 am
HONDA produced the metal ones in 2 sizes.
Large for the 250/305 and smaller for the CA92/95 and to fit other small CC bikes in the 60's. ..............lm
cmineo wrote:i did notice these were completely different than my other completely plastic ones i have on my other dreams .... i didnt realize Honda reproduced these to replace the original ones. they look decent and are larger than the current reproductions i bought for my black dream project ...
