honda305 Home honda305 Auctions honda305 Gallery honda305 Forum


honda305.com Forum

Login
□ Search
□ FAQ 
□ 
Vintage Honda Owners,
Restorers, Riders and
Admirers

CL77 Tool Kit

Carl
honda305.com Member
Posts: 17
Joined: Wed Nov 14, 2007 10:05 pm
Location: Lake Elsinore, Ca.

CL77 Tool Kit

Post by Carl » Sun Dec 02, 2007 10:17 pm

I don't remember just what tools were in the '67 Scramblers' tool kit. Does anyone have a list of the originally supplied tools? Also, where can I find a spanner wrench to adjust the shocks?

LOUD MOUSE
honda305.com Member
Posts: 7817
Joined: Mon Aug 15, 2005 8:23 am
Location: KERRVILLE, TEXAS

Re: CL77 Tool Kit

Post by LOUD MOUSE » Mon Dec 03, 2007 8:58 am

On page 50 of the CL77 parts book the tools are shown and listed on page 51. .....................lm

Carl wrote:I don't remember just what tools were in the '67 Scramblers' tool kit. Does anyone have a list of the originally supplied tools? Also, where can I find a spanner wrench to adjust the shocks?

Carl
honda305.com Member
Posts: 17
Joined: Wed Nov 14, 2007 10:05 pm
Location: Lake Elsinore, Ca.

CL77 Tool Kit

Post by Carl » Mon Jan 21, 2008 6:36 pm

Loud Mouse,

I just picked up a tool kit which I believe is correct for my 67 Scrambler. What is your opinion?
Attachments
1toolsb[1].jpg
1toolsb[1].jpg (10.26 KiB) Viewed 6436 times
1toolsc[1].jpg

LOUD MOUSE
honda305.com Member
Posts: 7817
Joined: Mon Aug 15, 2005 8:23 am
Location: KERRVILLE, TEXAS

Re: CL77 Tool Kit

Post by LOUD MOUSE » Mon Jan 21, 2008 7:48 pm

Check the Dog Bone wrench and see if the big end will remove the valve covers.
Looks to me that this may be a DREAM kit with the extra large wrench.
Please le me know. .............lm

Carl wrote:Loud Mouse,

I just picked up a tool kit which I believe is correct for my 67 Scrambler. What is your opinion?

Carl
honda305.com Member
Posts: 17
Joined: Wed Nov 14, 2007 10:05 pm
Location: Lake Elsinore, Ca.

Re: CL77 Tool Kit

Post by Carl » Tue Jan 22, 2008 1:53 pm

LOUD MOUSE wrote:Check the Dog Bone wrench and see if the big end will remove the valve covers.
Looks to me that this may be a DREAM kit with the extra large wrench.
Please le me know. .............lm

Carl wrote:Loud Mouse,

I just picked up a tool kit which I believe is correct for my 67 Scrambler. What is your opinion?
I have not yet received it in the mail, but I could not pass it up since they are so hard to find in any condition. When it comes, I will let you know. Was the size of the dog bone wrench the only difference between the two kits?.........Carl

LOUD MOUSE
honda305.com Member
Posts: 7817
Joined: Mon Aug 15, 2005 8:23 am
Location: KERRVILLE, TEXAS

Re: CL77 Tool Kit

Post by LOUD MOUSE » Tue Jan 22, 2008 2:12 pm

Pretty much that's it. .............lm

Carl wrote:
LOUD MOUSE wrote:Check the Dog Bone wrench and see if the big end will remove the valve covers.
Looks to me that this may be a DREAM kit with the extra large wrench.
Please le me know. .............lm

Carl wrote:Loud Mouse,

I just picked up a tool kit which I believe is correct for my 67 Scrambler. What is your opinion?
I have not yet received it in the mail, but I could not pass it up since they are so hard to find in any condition. When it comes, I will let you know. Was the size of the dog bone wrench the only difference between the two kits?.........Carl

JC
honda305.com Member
Posts: 18
Joined: Tue Dec 18, 2007 7:38 pm
Location: Central Coast California

CL77 Tool kit

Post by JC » Tue Jan 22, 2008 4:57 pm

My first post. I hope I can help.
I'm attaching a picture of the tool kit that came with my '67 scrambler. It appears to match the kit that Bill Silver has in his 300 parts catalogue on page 64 with the exception of the flat blade screwdriver shaft. The small end of the large wrench fits the valve covers and the big end fits the rear axel just as LM says.

JC
Attachments
Tools2.jpg

Post Reply




 

CB-77 | CYP-77 | Road Test | Riding Log | Literature | Zen | Marketplace | VJ Survey | Links | Home