72/77 starter sprocket oil seal needed

e3steve · Post by **e3steve** » Fri May 09, 2008 2:16 pm

Guys, can anyone help me with a new 91208-259-000 oil seal please? No luck in classifieds (with anything!). It's the only thing preventing me from riding now....

Regards to all,

Steve

davomoto · Post by **davomoto** » Fri May 09, 2008 2:33 pm

Steve, have you tried a local bearing and seal supplier? You need the three numbers on the seal, such as 12 25 7, and they should be able to get you one.

davomoto

e3steve · Post by **e3steve** » Fri May 09, 2008 2:37 pm

Thanks davo. Oddly enough, I was thinking the very same thing as I posted the request. I got my front wheel bearings from an industrial supplier here in Palma. €26 the pair! Result. I think I'll try them again for the seal.
Good of you to post so quickly; thanks again.

Rgds,
Steve

davomoto · Post by **davomoto** » Fri May 09, 2008 2:58 pm

You're welcome Steve, and good lock with the seal!

305 nutt · Post by **305 nutt** » Sat May 10, 2008 1:26 pm

Steve, I just bought 4 of them last week from western hills honda in cincinatti ohio. he's got all kinds of them. nutt

e3steve · Post by **e3steve** » Sat May 10, 2008 2:48 pm

Thanks for that nutt. I'll email Ed again if I have no luck locally.

e3steve · Post by **e3steve** » Mon May 12, 2008 1:31 pm

Christ Almighty, I'm so bloody green sometimes! I didn't even consider that the seal might just be a generic size until I posted the first Q in this series. I got some today; several, in fact. As quick as you like at the bearing supplier that I used previously.
If anyone needs one (or more), let me know. Cheap as chips. How much are they from WHH, nutt?
Thanks to davomoto for pointing out something that I should have worked out for myself. I'm such an arse at times!

Honda305.com Forum

honda305.com Forum

72/77 starter sprocket oil seal needed

72/77 starter sprocket oil seal needed

seals