honda305 Home honda305 Auctions honda305 Gallery honda305 Forum Forum

□ Search
□ FAQ 
Vintage Honda Owners,
Restorers, Riders and

Putting it all back together

Post Reply
68Cb77 Member
Posts: 204
Joined: Sun Nov 25, 2007 2:12 pm
Location: Toronto, Ontario, Canada

Putting it all back together

Post by 68Cb77 » Tue May 27, 2008 12:02 am

So I'm starting to put the engine back together. I only re-did the top end (New 1st over pistons, valve job). But I'm wondering, I had to put a new lower cam roller in because it was missing a few chunks, and want to know if I should flush the engine out a bit. I am going to take out the oil pump, and look for chunks of rubber, but do I need to do more? Can I flush anything through the engine? Or is that a bad idea? thanks<john>
67 Honda CB77 Superhawk
82 Honda XR200R
70 Honda CB750 K0

Post Reply


CB-77 | CYP-77 | Road Test | Riding Log | Literature | Zen | Marketplace | VJ Survey | Links | Home