honda305 Home honda305 Auctions honda305 Gallery honda305 Forum


honda305.com Forum

Login
□ Search
□ FAQ 
□ 
Vintage Honda Owners,
Restorers, Riders and
Admirers

66 CB77 Cafe Racer

Want to keep a Restoration Log? Post it here! You can include photos. Suggested format: One Restoration per Thread; then keep adding your updates to the same thread...
byrdman76
honda305.com Member
Posts: 96
Joined: Fri Feb 29, 2008 10:12 pm
Location: North Carolina

Post by byrdman76 » Fri Jul 18, 2008 12:32 pm

Called the local Honda dealer and they had the tool for ten bucks - no point in trying to find a needle in a haystack!

Thanks again.

Kirk
honda305.com Member
Posts: 71
Joined: Sun Jul 08, 2007 5:47 pm
Location: Portland Oregon

Part number for tool

Post by Kirk » Fri Jul 18, 2008 1:42 pm

Byrdman

Could I get the part number for the rotor tool?
Thanks,
Kirk

User avatar
davomoto
honda305.com Member
Posts: 2508
Joined: Sat Nov 18, 2006 7:36 pm
Location: Marin County CA

Post by davomoto » Fri Jul 18, 2008 5:25 pm

I have the Honda puller / bolt. It is 16mm x 1.5 thread . Motion Pro sells one for $9.90. Here's a link to the tool.

davomoto

http://www.motionpro.com/motorcycle/partno/08-0027

byrdman76
honda305.com Member
Posts: 96
Joined: Fri Feb 29, 2008 10:12 pm
Location: North Carolina

Re: Part number for tool

Post by byrdman76 » Fri Jul 18, 2008 8:31 pm

Kirk wrote:Byrdman

Could I get the part number for the rotor tool?
Thanks,
Kirk
Kirk

Davemoto listed the same one I purchased at the local Honda dealer - thanks davemoto! It popped of like butter this evening. Best 10 bucks you will ever spend - maybe...

Byrd

byrdman76
honda305.com Member
Posts: 96
Joined: Fri Feb 29, 2008 10:12 pm
Location: North Carolina

Post by byrdman76 » Tue Sep 09, 2008 9:53 pm

Got some of the bike back together and somewhat mocked up to be able to figure out how everything is going to go together. Once complete I'll tear everything back apart and paint it. I finally fired the bike up for the first time last night and I must say it sounds pretty good. The 180 crank really balances the motor out - theres hardly any vibration at all.

I did notice some arcing on the right point assembly while the bike was running. I have it set at 14 thou with new points and condenser. I have the ground strap attached to the bottom of the capacitor holder and the other end attached to the frame on the motor mount bolt. Any ideas?

I also was able to get my battery relocated and all of my wiring pretty much completed. I welded in a tray to hold and hide all of the wiring.
Attachments
side view.jpg
side view.jpg (5.23 KiB) Viewed 1037 times
battery.jpg
battery.jpg (4.22 KiB) Viewed 1037 times
starter.jpg
starter.jpg (3.9 KiB) Viewed 1037 times
speedo.jpg
speedo.jpg (3.88 KiB) Viewed 1037 times
wire tray.jpg
wire tray.jpg (4.15 KiB) Viewed 1037 times

byrdman76
honda305.com Member
Posts: 96
Joined: Fri Feb 29, 2008 10:12 pm
Location: North Carolina

Post by byrdman76 » Tue Sep 09, 2008 9:57 pm

The pictures seemed small - here is a link to the album

http://s170.photobucket.com/albums/u245 ... _my_albums

BTW I'm looking for a good set of rims if any one has any.

Gun
honda305.com Member
Posts: 632
Joined: Mon Oct 29, 2007 7:46 pm
Location: Salt Lake City, Utah

Post by Gun » Wed Sep 10, 2008 1:17 am

dig the army green.
'65 CB77
'66 CB450k0
'93 HD FXR

Post Reply




 

CB-77 | CYP-77 | Road Test | Riding Log | Literature | Zen | Marketplace | VJ Survey | Links | Home