needle settings

Davo · Post by **Davo** » Sat Dec 26, 2009 5:19 pm

Recently installed a new carb kit on my C77, can't seem to find in my guide the proper needle position. I have seen in some of the posts several people do the process of trial and error really do not want to take the carb on and off multiple times. any help, thanks

brewsky · Post by **brewsky** » Sat Dec 26, 2009 7:20 pm

Start in the middle position and go from there if needed. OEM needles, if not worn, are preferred over aftermarket replacement needles by many.
Good luck.

Davo · Post by **Davo** » Sun Dec 27, 2009 2:31 pm

Thanks, I will give it a try.