honda305.com Forum

Vintage Honda Owners, Restorers, Riders and Admirers

Latest Registry Entry
1965 Honda CP77 — Ulsan Metro City, Rep. Korea
Restored with original parts — Owner: J. Doe

cam wheel

Post Reply
mcaleerj
honda305.com Member
Posts: 7
Joined: Mon Nov 19, 2012 5:32 pm

cam wheel

Post by mcaleerj » Wed Nov 28, 2012 5:16 pm

anyone out there replace the rubber cam wheel ? What's the best way? Someone must have done this . mac / CL 77
Top
Cheburashka
honda305.com Member
Posts: 122
Joined: Sun Feb 20, 2011 10:07 pm
Location: Moses Lake, WA

Post by Cheburashka » Sat Dec 01, 2012 10:06 am

Do you mean the cam chain roller? If so, which one? There are to--one on the tensioner and one between the cylinders and the case. Replacing the one on the tensioner requires simply removing the tensioner. Replacing the lower one requires pulling the engine and removing the cylinders.
Top
mcaleerj
honda305.com Member
Posts: 7
Joined: Mon Nov 19, 2012 5:32 pm

cam rller

Post by mcaleerj » Sat Dec 01, 2012 11:12 am

thanks for the reply. I mean the cam chain tensioner roller. I have a replacement rubber wheel, but not sure how to get the wheel itself apart. Is there a rivet to be punched out? Have you done this? Thanks again,mac
Top
Post Reply

Return to “Motors - 247cc | 305cc | 337cc | 350cc”