CB77 ON EBAY

LOUD MOUSE · Post by **LOUD MOUSE** » Sun Jun 16, 2013 7:42 pm

Check out this offer.
I'll forward a couple of messages between the seller and I.

<251291003534>

Are you aware the front fork sliders are on the wrong sides which causes the axle to be installed from the wrong side?. .......emo

I like it that way

You are aware you have changed the steering dynamics. ........emo

Bull shit It steers just fine. Send me a picture of your superhawk that as nice as mine and I will listen to you otherwise go back under the rock you came from emo and have a nice day

You don't need to be a smart ass but sure looks like you are.
I've been involved with the CB/CL72/77 since 1962 and have a Type 2 CL72 in the AMA museum and another in a museum in PAUX. Penn and several trophy winners from coast to coast.
HONDA never issued a CB72/77 with a RED SEAT or RED center stand.
You could at least get the Light Lever on the headlight bucket installed correctly and that speedo cable won't last long with that arch from the Speedo Gear Box.
Those wires entering the Head Light Bucket will in time short to the metal and that will be fun for who ever owns it at that time.
Restored NO. Fancy Rebuild Yes. .......emo

Waiting for the next reply.
Will post as soon as it comes. .........emo

mike in idaho · Post by **mike in idaho** » Sun Jun 16, 2013 9:34 pm

Well, at least he managed to get the front wheel on the right way around. Why chrome the fenders, then leave the headlight mounting bolts rusty? Petcock lever plate looks rusty too. What's that tab under the top motor mount bolt for?

LOUD MOUSE · Post by **LOUD MOUSE** » Sun Jun 16, 2013 9:42 pm

Did you look at his eBay feedback.?
I haven't mentioned that the rear shocks aren't correct and that something isn't correct at the chrome fork seal holders as they look strange.
Another example of how to use the system to sell one of the most admired vintage HONDA'S. ......emo

mike in idaho wrote:Well, at least he managed to get the front wheel on the right way around. Why chrome the fenders, then leave the headlight mounting bolts rusty? Petcock lever plate looks rusty too. What's that tab under the top motor mount bolt for?

mike in idaho · Post by **mike in idaho** » Sun Jun 16, 2013 9:57 pm

"The bike is 100% original and numbers matching.", this guy sounds like a politician.

LOUD MOUSE · Post by **LOUD MOUSE** » Sun Jun 16, 2013 10:15 pm

The seller offers if you have questions to call or eMail.
Well with the answers and his eBay feedback would it not be a BLAST to call?. .............lm

mike in idaho wrote:"The bike is 100% original and numbers matching.", this guy sounds like a politician.

Hoosier Tom · Post by **Hoosier Tom** » Mon Jun 17, 2013 12:29 am

This guy is a joke. I think this is the same jerk who blasted Bill Silver when Bill had an early CL72 listed on e-bay, spouting a bunch of nonsense about Bill's bike.

HT

G-Man · Post by **G-Man** » Mon Jun 17, 2013 12:37 am

Look like he's attached some rear shock covers to the front fork seal holders.... I wonder what horrors lie inside the engine.

G

Honda305.com Forum

honda305.com Forum

CB77 ON EBAY

CB77 ON EBAY