Looking for Bikes, Parts, Etc.? Post it here or try the New Honda305.com Auctions !!!
-
SMBH
- honda305.com Member
- Posts: 294
- Joined: Thu Oct 24, 2013 1:16 pm
- Location: Redditch, England
Post
by SMBH » Tue Aug 12, 2014 2:21 pm
Any one know were I can get the clutch push rod oil seal in the UK (not CMS) OIL SEAL IS DOUBLE LIP 8 X 21 X 6.
Tried EBay/David Silver and google.
Having a nightmare of a job trying to stop the oil poring out of the end of the pushrod.
Mike.
-
SMBH
- honda305.com Member
- Posts: 294
- Joined: Thu Oct 24, 2013 1:16 pm
- Location: Redditch, England
Post
by SMBH » Thu Aug 14, 2014 4:40 am
OK so no oil seals in the UK also looks like there are no new clutch push rods as well.
-
laverda
- honda305.com Member
- Posts: 14
- Joined: Fri Sep 07, 2012 12:22 pm
- Location: UK Cambridge
Post
by laverda » Thu Aug 14, 2014 6:50 am
8x21x6mm Nitrile Rubber Rotary Shaft Oil Seal R21 / SC
simply Bearings_uk
on ebay £2.27
Richard CB72 owner
-
SMBH
- honda305.com Member
- Posts: 294
- Joined: Thu Oct 24, 2013 1:16 pm
- Location: Redditch, England
Post
by SMBH » Thu Aug 14, 2014 6:55 am
laverda wrote:8x21x6mm Nitrile Rubber Rotary Shaft Oil Seal R21 / SC
simply Bearings_uk
on ebay £2.27
Richard CB72 owner
I understand these are single lip Honda used a double lip oil seal, I have tried a single lip and it leaked.
Thanks for reply.
Mike.
-
laverda
- honda305.com Member
- Posts: 14
- Joined: Fri Sep 07, 2012 12:22 pm
- Location: UK Cambridge
Post
by laverda » Thu Aug 14, 2014 7:27 am
Hi Mike i have in my hand a oil seal number 91205 259 000 which i brought from Dave Silver would you like it ,if so please contact me by pm
Richard
