Dream pw22 carb slide and needle.

Eljeef · Post by **Eljeef** » Tue May 29, 2012 6:03 pm

Hi. Does anyone khave a picture of how the needle slide and the e clip go back together with the odd shaped spring? I can't remember. Jeff H.

Eljeef · Post by **Eljeef** » Tue May 29, 2012 11:16 pm

Never mind...I figured it out. Been away from this bike for so long I built up a wall between my imagination and reality. Carb is put back together with new needle, e-clip and gasket. Spacer is repaired and new o-rings installed. Gas cap is soaking in pb blaster. The two pieces of chain guard that were not mates took a lot of tweaking but now fit together nicely. Repaired the breather tube with some flexible black silicone. Went through all my parts boxes to see what I had. I must admit; I'm excited about this bike again and making good progress. ;)