Need a functional CB77 seat pan

Dana01 · Post by **Dana01** » Wed Apr 06, 2011 6:20 pm

Hi all. I was about to have my 1966 CB77 seat recovered but first I wanted to check out the pan and repair/repaint it.

It seems the pan either has terminal palsy or was the loser in a battle with a semi. About 9 cracks and another 1/2 dozen bends and tweaks. I'm planning a cremation.

Anyone have a decent seat pan? I don't mind a little crack-brazing or painting. I'll cruise the forum for fiberglass/carbon as well.

Thanks!

cyclon36 · Post by **cyclon36** » Thu Apr 07, 2011 7:22 am

I have a spare pan. It's got a small crack on the edge but nothing terminal. It is also missing one mounting bracket on the rear that the mounting bolt threads into.

shooter_bighorn@yahoo.com · Post by **shooter_bighorn@yahoo.com** » Sat Apr 09, 2011 9:56 pm

I have one on Ebay right now!

Dana01 · Post by **Dana01** » Mon Apr 18, 2011 3:48 pm

Thanks guys ... I missed the two replies ... but went and got a red one on ebay.

honda305.com Forum

honda305.com Forum

Need a functional CB77 seat pan

Need a functional CB77 seat pan