how in the hell does this happen?

G-Man · Post by **G-Man** » Tue May 12, 2015 5:25 pm

For the CR72?

That sounds interesting.. .tell us more, please.

G

Airmun wrote:I have the patterns for the early type primary case. They may be modified to suit standard cases, I am not sure. The photos from a couple of posts ago will show the part.

Airmun · Post by **Airmun** » Tue May 12, 2015 6:12 pm

I am trying to add an image but don't have the skills! Any help would be welcome. I have done it before but can't remember how!

G-Man · Post by **G-Man** » Wed May 13, 2015 12:23 am

Make sure the picture is less than 500 k bytes.

Depending on what graphi program you have there should be an option to resize.

Failing that, please drop me a pm, I'll send you my email address and I. Can help get it posted.

G

Airmun wrote:I am trying to add an image but don't have the skills! Any help would be welcome. I have done it before but can't remember how!

jerry · Post by **jerry** » Wed May 13, 2015 2:07 am

I want to look at the photos Ian. I am enjoying this. Will phone you in the next couple of days. all the best Jerry

GORDON BROWN · Post by **GORDON BROWN** » Wed May 13, 2015 12:18 pm

Hello Everybody

Here is another CB with a dry clutch ( and CB450 top end ). I think this is probably one of the ones that Pete Rhodes built with a the extended gearbox shaft made by Nova to take a Yamaha TZ ? clutch. Nova sell a similar setup for the CB450 racers.
I suspect the next thing is for someone to cast up a CR style cam cover to fit the Suzuki GSX head like they do for the Honda replicas ( see pictures of Jerry Kooistra's new 4 cyl. on this site to get the idea ) and sooner or later with the dry clutch etc. they will look that close to the real thing we ( well at least me ) wont know the difference. New style Keihin carbs not withstanding that is. LOL.

Gordon

SAFOJ

GORDON BROWN · Post by **GORDON BROWN** » Wed May 13, 2015 12:37 pm

Better still here's a kit you can build yourself ! unfortunately currently out of stock at your local Honda dealer.

Gordon

jerry · Post by **jerry** » Wed May 13, 2015 3:02 pm

Dear Gordon, Very nice photos. For me it is the first time That I have seen inside a CR. Thank you for sharing as LM would say. I hope (Airmun) will show what he has done. It is really worth seeing. We are again going through an interesting stage with this part of the site and the Restoration part. Good on you for leading the charge G Man. All the best Jerry

honda305.com Forum

honda305.com Forum

how in the hell does this happen?

CR 72/77

CR 72/77