honda305 Home honda305 Auctions honda305 Gallery honda305 Forum


honda305.com Forum

Login
□ Search
□ FAQ 
□ 
Vintage Honda Owners,
Restorers, Riders and
Admirers

How do you wire a CA 77 for Winkers ( INDICATORS )

Fuel System: Gas (Petrol) tanks, Carburators
Post Reply
gordonkreltsz
honda305.com Member
Posts: 21
Joined: Fri Jul 18, 2014 3:51 am
Location: Sydney Australia

How do you wire a CA 77 for Winkers ( INDICATORS )

Post by gordonkreltsz » Wed Jul 01, 2015 5:30 am

Hi Guys, I intend to put a set of winkers on my Bike, I have a wiring diagram & know how to do the wiring.

I can tap the power direct from the battery to the flasher via a fuse, the only drawback there will always be power to the flasher.

I prefer to take the power from the ignition switch, but I am not sure which wire to tap inside the Headlight housing from the ignition switch, Any ideas,
Thanks,
Gordon.

OldStan
honda305.com Member
Posts: 548
Joined: Wed Jul 14, 2010 5:33 pm
Location: Galt, California

Post by OldStan » Wed Jul 01, 2015 10:14 pm

Try the hot wire to the neutral light, that's where I've hooked up my voltmeter.
63 CA78

gordonkreltsz
honda305.com Member
Posts: 21
Joined: Fri Jul 18, 2014 3:51 am
Location: Sydney Australia

Winkers wiring

Post by gordonkreltsz » Wed Jul 01, 2015 11:37 pm

Thanks, I will give it a go, Gordon.

Post Reply




 

CB-77 | CYP-77 | Road Test | Riding Log | Literature | Zen | Marketplace | VJ Survey | Links | Home