1965 C77E petcock parts, level pivot "pin"?

roadcapDen · Post by **roadcapDen** » Sat Oct 24, 2015 10:45 am

Howdy all, got a new petcock rebuild kit put in, but, the lever will slide out when all together?
It looks like there should be a middle "pin" that the lever would pivot on but l don't have one and can't see that on any expanded views. Anybody have a pic or part #?

Thanks all.
Den

roadcapDen · Post by **roadcapDen** » Sat Oct 24, 2015 11:41 am

Soooo, l put in a little finishing nail in the middle hole to see if that works?!?

Eljeef · Post by **Eljeef** » Sat Oct 24, 2015 11:52 am

Search Youtube under "Cock Fuel C72 C77 Rebuild" You will see exactly how it goes together and what pieces you need.

roadcapDen · Post by **roadcapDen** » Sat Oct 24, 2015 12:00 pm

Thanks, looks like l'm missing that "cross" spring part that goes on the top plate!?
I have the top plate but it's just flat.
Anybody have one? doesn't seem to come in the "kit"

PS I bought this scoot from Windsor a few months ago!

Hahnda · Post by **Hahnda** » Sat Oct 24, 2015 5:13 pm

They don't come with a rebuild kit because usually the old one is ok to use. That can be a problem if you don't have one in the first place.

There are some out there to purchase if no one has a spare around.

http://www.ebay.com/itm/HONDA-DREAM-C72 ... 1121669013

roadcapDen · Post by **roadcapDen** » Sat Oct 24, 2015 5:21 pm

Thanks, l used a nail and cut 2 paper gaskets, seems to be OK, will see.

mike1969 · Post by **mike1969** » Sat Oct 24, 2015 5:36 pm

The piece you are missing is very important. It's spring steel that puts pressure on the petcock parts which keeps it from leaking.