Home Auctions Gallery Forum

honda305.com Forum

Vintage Honda Owners, Restorers, Riders and Admirers

CA 77 valve clearance

CYP77 - Police | Race Bikes | Choppers, Bobbers and Mods
Post Reply
bigtree119
honda305.com Member
Posts: 1
Joined: Sat Feb 25, 2006 12:01 pm

CA 77 valve clearance

Post by bigtree119 » Sun Mar 26, 2006 11:10 pm

Hello 305 guys: I am getting conflicting specs for adjusting the valves on my 305 DREAM. What do you experts suggest? I have been told by my local dealer .04" for both in & out. My repair manual suggests 0.9-.11" but it is also hard to understand by the way the manual is printed. Any info would be helpful and appreciated. I set them at .04 and am getting some chatter. THANKS H.V. Boone
Top
rrekr
honda305.com Member
Posts: 41
Joined: Mon Nov 07, 2005 8:44 pm
Location: Oklahoma

Post by rrekr » Mon Mar 27, 2006 3:52 am

They should be set at .004. If you set them at .040, I'll bet they are a bit noisy. The infomation from your manual is metric. it should read .09-.11
which would be .0035-.0043. Good luck!
Top
Post Reply

Return to “CYP77 | Racers | Choppers”