BK, assuming that you've not done so already, buy a kit; you can never have too many gaskets for those 'little jobs', especially for the camchain tensioner and clutch cover.
A copper head gasket, once compressed, should be discarded when removed. Don't take a chance if your bike is as precious to you as most of ours are to us all! It's inconvenient, at best, if it fails ANYWHERE; tragic, at worst. My philosophy? If you do a job properly in the first place, then you only do it once!!
Regards and good luck,
Steve
honda305.com Forum
Vintage Honda Owners, Restorers, Riders and Admirers
REUSE OLD GASKETS??
-
jim milewski
- honda305.com Member
- Posts: 10
- Joined: Thu Aug 21, 2008 6:52 am
- Location: vermont
-
e3steve
- h305 Moderator
- Posts: 2601
- Joined: Fri Oct 31, 2003 1:38 pm
- Location: Mallorca, Spain & Warsash, UK
I got my second kit here: http://cgi.ebay.com/ebaymotors/ws/eBayI ... 0256590310
You could email the guy & see if he has more ddrano@telus.net
Alternatively, eBay search honda cb77 (or whichever your model is) & trawl for a kit; they appear frequently.
Good luck!
You could email the guy & see if he has more ddrano@telus.net
Alternatively, eBay search honda cb77 (or whichever your model is) & trawl for a kit; they appear frequently.
Good luck!