-
Wilf
- honda305.com Member
- Posts: 395
- Joined: Thu Jan 22, 2009 10:32 am
- Location: Gibsons, BC Canada
Post
by Wilf » Sun Mar 15, 2009 7:03 pm
My CB77 had no breather tube on the top cover and before putting the coils back in I thought I would replace the breather tube. After searching the posts this morning I know from the photo that the tube runs down under the crankcase cover plate, but I don't know where it finally ends up. Would someone clue me in please?
Thanks
-
Attachments
-

- I can't remember which post this came from, otherwise I would credit the author.
-
sixtiescycles
- honda305.com Member
- Posts: 13
- Joined: Sun Jan 25, 2009 5:06 pm
- Location: Gresham, OR
Post
by sixtiescycles » Mon Mar 16, 2009 7:24 am
It makes a 90 degree bend, goes under the latch bracket and out the the hole below the alternator wires where it then terminates.
Dick
-
Wilf
- honda305.com Member
- Posts: 395
- Joined: Thu Jan 22, 2009 10:32 am
- Location: Gibsons, BC Canada
Post
by Wilf » Mon Mar 16, 2009 9:02 am
Thanks Dick, that is exactly what I needed to know. I imagine having a half inch or so protruding from the hole would be appropriate?
Wilf
-
LOUD MOUSE
- honda305.com Member
- Posts: 7818
- Joined: Mon Aug 15, 2005 8:23 am
- Location: KERRVILLE, TEXAS
Post
by LOUD MOUSE » Mon Mar 16, 2009 9:31 am
As long as it doesn't run on the sprocket. .................lm
Wilf wrote:Thanks Dick, that is exactly what I needed to know. I imagine having a half inch or so protruding from the hole would be appropriate?
Wilf
RIDE IT DON'T HIDE IT!
-
Wilf
- honda305.com Member
- Posts: 395
- Joined: Thu Jan 22, 2009 10:32 am
- Location: Gibsons, BC Canada
Post
by Wilf » Mon Mar 16, 2009 10:20 am
Thanks for the caution, LM.
Wilf
-
LOUD MOUSE
- honda305.com Member
- Posts: 7818
- Joined: Mon Aug 15, 2005 8:23 am
- Location: KERRVILLE, TEXAS
Post
by LOUD MOUSE » Mon Mar 16, 2009 10:23 am
Ya welcome. .............lm
Wilf wrote:Thanks for the caution, LM.
Wilf
RIDE IT DON'T HIDE IT!