Eljeef wrote:Here is a picture of mine when I first got it. Can't promise the routing is correct but I never touched it...;)
honda305.com Forum
Vintage Honda Owners, Restorers, Riders and Admirers
Need a Clutch cable but ???????
-
LOUD MOUSE
- honda305.com Member
- Posts: 7818
- Joined: Mon Aug 15, 2005 8:23 am
- Location: KERRVILLE, TEXAS
-
FluteTears
- honda305.com Member
- Posts: 251
- Joined: Sun Jul 01, 2007 10:15 am
- Location: Denton, Texas
Well now this is what I seen on a 1963 I have mine at the back of the coil. I will post photos to show what I have if I was to do it like yours I would have a Big loop at the gas tank...Eljeef wrote:Here is a picture of mine when I first got it. Can't promise the routing is correct but I never touched it...;)
Thanks for the photos looks like the same clutch- engine that I have...
Brad
1974 CT90
1964 CA77
1964 CA77
-
jensen
- honda305.com Member
- Posts: 1143
- Joined: Tue Feb 12, 2008 2:51 pm
- Location: netherlands, huizen
- Contact:
Hi,
I'm afraid LM is right,
checked mine, and it is mounted wrong.
But.... I also started serching for picturs on the net, and it turns out that I'm not the only one.
In the original pictures issued by Honda it is mounted backwards, so I know what to do tomorrow,
Jensen
I'm afraid LM is right,
checked mine, and it is mounted wrong.
But.... I also started serching for picturs on the net, and it turns out that I'm not the only one.
In the original pictures issued by Honda it is mounted backwards, so I know what to do tomorrow,
Jensen
assembly of Japanese motorcycles requires great peace of mind (Pirsig)
-
FluteTears
- honda305.com Member
- Posts: 251
- Joined: Sun Jul 01, 2007 10:15 am
- Location: Denton, Texas
Now this is what I have if I was to put the cable in front hole I would a a very sharp bend in the cable.FluteTears wrote:Well now this is what I seen on a 1963 I have mine at the back of the coil. I will post photos to show what I have if I was to do it like yours I would have a Big loop at the gas tank...Eljeef wrote:Here is a picture of mine when I first got it. Can't promise the routing is correct but I never touched it...;)
Thanks for the photos looks like the same clutch- engine that I have...
Brad
Maybe the cable is wrong and to long?
Thanks Brad
- Attachments
-
1974 CT90
1964 CA77
1964 CA77
-
LOUD MOUSE
- honda305.com Member
- Posts: 7818
- Joined: Mon Aug 15, 2005 8:23 am
- Location: KERRVILLE, TEXAS
Share pics?. ...........lm
jensen wrote:Hi,
I'm afraid LM is right,
checked mine, and it is mounted wrong.
But.... I also started serching for picturs on the net, and it turns out that I'm not the only one.
In the original pictures issued by Honda it is mounted backwards, so I know what to do tomorrow,
Jensen
-
LOUD MOUSE
- honda305.com Member
- Posts: 7818
- Joined: Mon Aug 15, 2005 8:23 am
- Location: KERRVILLE, TEXAS
Thanks for sharing the pics Jensen.
I zoomed pic 1 in and I do see the Kick Lever but no Clutch Cable.
Pic 2 is of the later issue DREAM and is correct with the change HONDA made to make the system the same/similar as the CB/CL72/77 bikes. ...........lm
I zoomed pic 1 in and I do see the Kick Lever but no Clutch Cable.
Pic 2 is of the later issue DREAM and is correct with the change HONDA made to make the system the same/similar as the CB/CL72/77 bikes. ...........lm
jensen wrote:Hi,
One ad (takes a good eye, but visible and one poster, well spread on the net.
Jensen