-
yellow60
- honda305.com Member
- Posts: 37
- Joined: Tue Nov 09, 2010 10:26 pm
- Location: Lees Summit Missouri
Post
by yellow60 » Wed Nov 10, 2010 8:48 am
Does anyone know how the air filter frame cover is held on? I am talking about the metal cover that has the small hole in the lower corner that the battery wire goes through. It is about six inches in diameter and it covers the side of the frame after the air filter is in place and is painted to match the color of the bike.
The dream I purchased just had it duck taped on which I don't believe is correct any help would be great.
-
davomoto
- honda305.com Member
- Posts: 2508
- Joined: Sat Nov 18, 2006 7:36 pm
- Location: Marin County CA
Post
by davomoto » Wed Nov 10, 2010 9:35 am
It should have a plastic knob with a 6mm stud that goes through the cover, and into a hole in the frame.
Davo
davomoto
64 CB77
63-7 CB77 Cafe'
67 CL77
64 CL72
66 CL77 big bore flat tracker
Many others!
-
mike1969
- honda305.com Member
- Posts: 720
- Joined: Sat Feb 06, 2010 6:53 pm
- Location: w.pa.
Post
by mike1969 » Wed Nov 10, 2010 10:28 am
Davo,I think he means the air filter access cover.
From what I can tell the pressure from battery placed up against it holds it in place (barely).
-
davomoto
- honda305.com Member
- Posts: 2508
- Joined: Sat Nov 18, 2006 7:36 pm
- Location: Marin County CA
Post
by davomoto » Wed Nov 10, 2010 11:38 am
Thanks for the clarification Mike, I was thinking sidecover as on a CB77.
Davo
davomoto
64 CB77
63-7 CB77 Cafe'
67 CL77
64 CL72
66 CL77 big bore flat tracker
Many others!
-
yellow60
- honda305.com Member
- Posts: 37
- Joined: Tue Nov 09, 2010 10:26 pm
- Location: Lees Summit Missouri
Post
by yellow60 » Wed Nov 10, 2010 12:43 pm
It is the air filter access cover and that makes since having the battery hod it in place.
Thanks for the help guys.
-
davomoto
- honda305.com Member
- Posts: 2508
- Joined: Sat Nov 18, 2006 7:36 pm
- Location: Marin County CA
Post
by davomoto » Wed Nov 10, 2010 1:42 pm
Yellow60, post your location when you get a chance. Some folks on the site are more likely to chime in if you do so.
Davo
davomoto
64 CB77
63-7 CB77 Cafe'
67 CL77
64 CL72
66 CL77 big bore flat tracker
Many others!
-
LOUD MOUSE
- honda305.com Member
- Posts: 7818
- Joined: Mon Aug 15, 2005 8:23 am
- Location: KERRVILLE, TEXAS
Post
by LOUD MOUSE » Wed Nov 10, 2010 1:58 pm
On a DREAM there is a flat sort of cover which is held in place with a cross screw, 5x25 and screws into the left side of the air filter. ......lm
yellow60 wrote:Does anyone know how the air filter frame cover is held on? I am talking about the metal cover that has the small hole in the lower corner that the battery wire goes through. It is about six inches in diameter and it covers the side of the frame after the air filter is in place and is painted to match the color of the bike.
The dream I purchased just had it duck taped on which I don't believe is correct any help would be great.
