Home Auctions Gallery Forum

honda305.com Forum

Vintage Honda Owners, Restorers, Riders and Admirers

Gear Ratio

Clutch, Transmission, Drive Chain, Sprockets
Post Reply
OldStan
honda305.com Member
Posts: 548
Joined: Wed Jul 14, 2010 5:33 pm
Location: Galt, California

Post by OldStan » Thu Jul 07, 2011 1:07 pm

By the way, if you ever do have your transmission opened up, I suggest you look into Xing 2nd and 3rd gears, which gives a more even spacing. Many prefer moving 2nd closer to 1st, and increasing the gap between 3rd and 4th gear ratios.
I believe Forest is talking about a CA. Swapping gear is not necessary, the stock gear ratios for 2nd and 3rd are different from the CB.
63 CA78
Top
redblk63
honda305.com Member
Posts: 104
Joined: Mon Oct 15, 2007 5:16 pm
Location: pasadena, california

Post by redblk63 » Thu Jul 07, 2011 1:36 pm

Thanks OldStan, I do not know beans about CAs. It makes sense they would have less "road racery" gearing.
Top
OldStan
honda305.com Member
Posts: 548
Joined: Wed Jul 14, 2010 5:33 pm
Location: Galt, California

Post by OldStan » Thu Jul 07, 2011 1:46 pm

Check out this linkhttp://www.honda305.com/forums/viewtopi ... ansmission

It shows the power transmission path well.
63 CA78
Top
Post Reply

Return to “Transmission”