Handle bar turn signals?

KellieLyyne · Post by **KellieLyyne** » Fri Feb 03, 2012 9:44 pm

Hey well you have good taste!!! Yeah you can't run red in the front. At least not here in CA. I saw those bar ends too. I just didnt think they fit the look I was going for. There are also a lot of options at:

http://www.cruisercustomizing.com/turns ... ical-audio

That's where I picked up my clamps. Im sure you can get them from just about anywhere though. They are:

http://www.cruisercustomizing.com/kurya ... rt/KY-4018

rrietman · Post by **rrietman** » Fri Feb 03, 2012 9:57 pm

K; you know there are turn signals available for the C77/78 as originally fitted? unfortunately they come from those asian guys. I have a set of handlebars with the holes in them for these signals. the rears (later) mount in the fender brace.
Randy

KellieLyyne · Post by **KellieLyyne** » Fri Feb 03, 2012 10:02 pm

Yeah I've seen the square ones right? My bike a 1963 with the earlier luggage rack/brace. My bike, is a mostly stock a bit of modern flare. Not too much, just a tad.

My finished Dream by bruceandkellie, on Flickr

Kigsby · Post by **Kigsby** » Sat Feb 04, 2012 10:07 am

I checked the laws for Florida and they do have to have amber. I found some lens' on ebay so I can change the color. I have some time to think about it. I have to still work on my kickstart and diagnose the solenoid/starter problem. Maybe I'll wait until you finish with yours and I can see how nice it looks! I get so jealous every time I see pics of your bike!!

KellieLyyne · Post by **KellieLyyne** » Sun Feb 05, 2012 3:30 pm

Awww Kigs, thanks, but you can have yours like mine too.... it took us 3 years to get it like this. And honestly there's still more to do. Clutch plates are slipping, and the starter is making a really bad squeal most of the time now. I was told it is probably the starter clutch springs. So that will be at the top of the list too. But, I love this bike, so fixing things is going to be a life long thing.