Home Auctions Gallery Forum

honda305.com Forum

Vintage Honda Owners, Restorers, Riders and Admirers


float setting

Points Based Ignition | Electronic Ignition Upgrade
Post Reply
eddie
honda305.com Member
Posts: 4
Joined: Thu Jul 22, 2004 8:06 am
Location: Russellville, Ar 72801

float setting

Post by eddie » Tue Aug 10, 2004 7:14 am

How much gas will be in the bowl if the float is set right in the stock carbs of the CB77?

Lee
honda305.com Member
Posts: 13
Joined: Wed Dec 29, 2004 12:01 am

Re: float setting

Post by Lee » Wed Dec 29, 2004 12:38 am

eddie wrote:<br />How much gas will be in the bowl if the float is set right in the stock carbs of the CB77?<br />
<br /><br />First, turn the gas valve on, then off, then when you pull the float bowl off, put it at the same angle it is normally at; the top of the gas should be around 1/8&quot; inch below the top of the float bowl. This is not the official procedure, but should work fine, and thought this answer would be better than no answer.

Post Reply