New wiring product!

[4shorts]

Hi everyone. Here's a product that I started using the last few months to help make my wiring look much neater while protecting it as well. The products name is TECHFLEX and made by Flexo. This nylon mesh come in a variety of sizes and colors. I purchased two packs. One red pack and is 1/4 size that can expand up to 7/16th inch and comes in a 25 foot roll.
I've done the wiring harness on the Dream along with other areas. It makes everything look professional when applied. I used a hot knife to cut it, that way it don't unravel and I also used heat shrink to finish it off. I think it's a product worth using. I've attached a link to the site where I purchased the item. Paul

http://www.partsexpress.com/webpage.cfm ... age_ID=161

[joeweir1]

Thanks for posting that Paul.I had noticed it on the Dream and thought you had used shrink tube but was not sure.Joe

[4shorts]

Thanks Joe. The heat shrink was only used on the ends of the casing to cap it off. Tape could also be used as well. Since I've used this stuff on the Dream It has been used on a regular basis in our shop for other repairs and It makes for a very clean looking job. Paul

[bill440cars]

Hey, very cool way to handle the wiring. Nice and tidy!

Later on, Bill