Here we go again.....
Another "oil debate" (or should that be 'debacle'?); only this time revolving (ha-ha-harrrr) around SGs! How ever did these bikes run in the 60s and survive into this century? :-)
OK--I believe in the centrifugal oil filter now!!
Hi,
Many bikes did survive because they didn't run the last 30 years or so.
But I don't want to be theoretical, maybe it's time for some tests :
I suggest you take a beer bottle, smash it to pieces.
Put a few small pieces into the engine, and ride the bike.
After a few hundred miles check your oil filter , please report here with pictures.
Will you guys pick up the gauntlet ?
Jensen
Many bikes did survive because they didn't run the last 30 years or so.
But I don't want to be theoretical, maybe it's time for some tests :
I suggest you take a beer bottle, smash it to pieces.
Put a few small pieces into the engine, and ride the bike.
After a few hundred miles check your oil filter , please report here with pictures.
Will you guys pick up the gauntlet ?
Jensen
If you provide the bike, I'll provide the beer bottle.jensey wrote:Hi,
I suggest you take a beer bottle, smash it to pieces.
Put a few small pieces into the engine, and ride the bike.
After a few hundred miles check your oil filter , please report here with pictures.
Will you guys pick up the gauntlet ?
Jensen
regards,
Sir Laffsalot
Hi,
You have the bike, and a beer bottle, and your infinite belief in the spinner filter, so what is stopping you from testing ? What is holding you back ? Put your money where your mouth is, please.
And Steve, what is keeping you from testing this theory ? btw, did you rebuild your engine already ?
I was in at the Intermot in Koln last week, and I wondered why the newest Honda's weren't all equipped with a spinner filter.
Jensen
You have the bike, and a beer bottle, and your infinite belief in the spinner filter, so what is stopping you from testing ? What is holding you back ? Put your money where your mouth is, please.
And Steve, what is keeping you from testing this theory ? btw, did you rebuild your engine already ?
I was in at the Intermot in Koln last week, and I wondered why the newest Honda's weren't all equipped with a spinner filter.
Jensen
-
- h305 Moderator
- Posts: 2601
- Joined: Fri Oct 31, 2003 1:38 pm
- Location: Mallorca, Spain & Warsash, UK
I've been UK-side and around other Southern European regions for a few months, so I'm away from my CB77. And in the UK it's rained a lot, so I've had little enthusiasm for the old CB250!
I have most of the parts, in Spain, for the CB77 power plant's rebuild; I just need to get back to it. When I do I'll stick to the internals provided by Honda, thanks.....
I have most of the parts, in Spain, for the CB77 power plant's rebuild; I just need to get back to it. When I do I'll stick to the internals provided by Honda, thanks.....