Home Auctions Gallery Forum

honda305.com Forum

Vintage Honda Owners, Restorers, Riders and Admirers

Shift Lever

Clutch, Transmission, Drive Chain, Sprockets
Post Reply
papabear
honda305.com Member
Posts: 12
Joined: Tue Sep 09, 2014 11:44 pm
Location: Palm Desert, CA.

Shift Lever

Post by papabear » Sat Sep 13, 2014 11:56 pm

Hello. Need some help here. I have a 64 CL72 with a shift lever that has the rubber sleeve over the shifter. The microfiche parts guide shows a lever with a flat square end, no rubber sleeve. The factory service manual shows rubber sleeve. The service manual is a 63 printing. Did Honda change the pedal? Thanks
Top
User avatar
G-Man
honda305.com Member
Posts: 5678
Joined: Wed Mar 25, 2009 5:17 pm
Location: Derby, UK
Contact:
Contact G-Man

Post by G-Man » Sun Sep 14, 2014 1:59 am

As far as I know the CLs always used the all-metal shifter with the square end.

Some will correct me if I am wrong.... :-)

G
'60 C77 '60 C72 '62 C72 Dream '63 CL72
'61 CB72 '64 CB77 '65 CB160
'66 Matchless 350 '67 CL77
'67 S90 '77 CB400F
Top
mike1969
honda305.com Member
Posts: 720
Joined: Sat Feb 06, 2010 6:53 pm
Location: w.pa.

shift lever

Post by mike1969 » Sun Sep 14, 2014 7:40 am

I have a CL all metal shifter in decent condition. I'll sell it for five bucks + actual shipping. PM me. Mike
Top
papabear
honda305.com Member
Posts: 12
Joined: Tue Sep 09, 2014 11:44 pm
Location: Palm Desert, CA.

Re: shifter

Post by papabear » Sun Sep 14, 2014 7:15 pm

I have both types. The one on the bike now is the same as pictured in the CL250 fsm. I have the square one that is shown in the microfiche parts guide. Just can't figure our which is correct part. Thank you for the generous offer.
Top
Post Reply

Return to “Transmission”