Home Auctions Gallery Forum

honda305.com Forum

Vintage Honda Owners, Restorers, Riders and Admirers

Super Slow 65 CB77 Restoration commences

Want to keep a Restoration Log? Post it here! You can include photos. Suggested format: One Restoration per Thread; then keep adding your updates to the same thread...
Post Reply
jugger18
honda305.com Member
Posts: 117
Joined: Mon Aug 10, 2009 10:01 am
Location: Madison, WI

Post by jugger18 » Sat Nov 29, 2014 4:56 pm

Well I just carried the engine to the basement :) That was fun...said no one ever. I have to deal with stuck/frozen screws on the clutch cover
Top
User avatar
Waveblaster
honda305.com Member
Posts: 215
Joined: Fri Dec 27, 2013 11:13 am
Location: Perth Western Australia

Post by Waveblaster » Sat Nov 29, 2014 8:10 pm

impact driver for the tricky ones.
Top
jugger18
honda305.com Member
Posts: 117
Joined: Mon Aug 10, 2009 10:01 am
Location: Madison, WI

Post by jugger18 » Sat Nov 29, 2014 8:19 pm

Yeah. I bought one but have not had much luck with it so far. It was a cheap one from harbor freight
Top
ahenthus
honda305.com Member
Posts: 92
Joined: Tue Jan 29, 2013 10:25 am
Location: Upstate SC

Post by ahenthus » Sat Nov 29, 2014 9:41 pm

The HF impact you're using probably has Phillips bits. You need to buy a JIS bit set. JIS will fit the fasteners properly and you should get much better purchase whereas the SAE bits you're using cannot make full contact with the fasteners because they're designed to cam out. JIS bits are readily available.
Top
LOUD MOUSE
honda305.com Member
Posts: 7818
Joined: Mon Aug 15, 2005 8:23 am
Location: KERRVILLE, TEXAS

Post by LOUD MOUSE » Sun Nov 30, 2014 7:39 am

Where can I get JIS bits for a Hammer Drive?. .......lm


ahenthus wrote:The HF impact you're using probably has Phillips bits. You need to buy a JIS bit set. JIS will fit the fasteners properly and you should get much better purchase whereas the SAE bits you're using cannot make full contact with the fasteners because they're designed to cam out. JIS bits are readily available.
Top
R100
honda305.com Member
Posts: 332
Joined: Sun Jul 01, 2012 3:02 pm

Post by R100 » Sun Nov 30, 2014 9:00 am

http://www.vesseltools.com/hand-tools/s ... ducts.html
LOUD MOUSE wrote:Where can I get JIS bits for a Hammer Drive?. .......lm
ahenthus wrote:The HF impact you're using probably has Phillips bits. You need to buy a JIS bit set. JIS will fit the fasteners properly and you should get much better purchase whereas the SAE bits you're using cannot make full contact with the fasteners because they're designed to cam out. JIS bits are readily available.
Top
LOUD MOUSE
honda305.com Member
Posts: 7818
Joined: Mon Aug 15, 2005 8:23 am
Location: KERRVILLE, TEXAS

Post by LOUD MOUSE » Sun Nov 30, 2014 9:49 am

Thanks.
I ordered the 2400 set. ......lm
R100 wrote:http://www.vesseltools.com/hand-tools/s ... ducts.html
LOUD MOUSE wrote:Where can I get JIS bits for a Hammer Drive?. .......lm
ahenthus wrote:The HF impact you're using probably has Phillips bits. You need to buy a JIS bit set. JIS will fit the fasteners properly and you should get much better purchase whereas the SAE bits you're using cannot make full contact with the fasteners because they're designed to cam out. JIS bits are readily available.
Top
Post Reply

Return to “Restoration Projects”