Front mudguard/fender

modelman · Post by **modelman** » Fri Sep 04, 2015 8:32 am

OK, so this is as far as I've got, cobbled this up using the very short piece of original that came with the bike for reference, & using dimensions kindly provided from this forum.
I'm using the original centre fork-stay, but have yet to fabricate the other two, does it look something like, or is it 'wrong' somewhere, are the sides too deep? I don't think its too far off, & once the stays are made & fitted it may look better??
I don't think the section is too far off as the original fork-stay fits perfect.

Suggestions welcomed.

PhilD · Post by **PhilD** » Fri Sep 04, 2015 10:04 am

Hi model man,
Great to see your updates and very impressed by the standard of your work. Your reconstructed mud guard looks pretty close, maybe a little too far from the tyre at the front but looks just right at the interface with the forks. Would you like to borrow an OEM mud guard for direct comparison? I've just finished my CB77 restoration and have a dismantled CB72 awaiting attention and am reasonably close by in Leeds if so PM me.
PhilD

G-Man · Post by **G-Man** » Fri Sep 04, 2015 10:23 am

Modelman

Great work. Did you roll that section yourself? If so that's a superb job. The stays will improve the look, but it's pretty close.

I would love to get an alloy one made for my '61 bike.

G

modelman · Post by **modelman** » Fri Sep 04, 2015 2:12 pm

PhilD, thanks for your kind comments, 'the loan of a fender? NOW you tell me!!!

I didn't think there were any about, & yes it looks a bit out of alignment, but it should 'rock' on the centre bracket once the other braces are fitted.

G-Man, I did NOT roll the section, i'm nowhere near that good, but I DID 100% make it all myself,
& the actual radius may be out a bit as I had no reference , & oh yeah, i'm a terrible cheat, its not what it seems!!

G-Man · Post by **G-Man** » Fri Sep 04, 2015 3:02 pm

You only had to ask. I have one too.

G

modelman wrote:PhilD, thanks for your kind comments, 'the loan of a fender? NOW you tell me!!!

I didn't think there were any about, & yes it looks a bit out of alignment, but it should 'rock' on the centre bracket once the other braces are fitted.

G-Man, I did NOT roll the section, i'm nowhere near that good, but I DID 100% make it all myself,
& the actual radius may be out a bit as I had no reference , & oh yeah, i'm a terrible cheat, its not what it seems!!

malcolmgb · Post by **malcolmgb** » Fri Sep 04, 2015 5:16 pm

G-Man wrote:
I would love to get an alloy one made for my '61 bike.

Graham I recently met someone local who may be able to help you, will speak when you get back.

R100 · Post by **R100** » Fri Sep 04, 2015 5:22 pm

modelman - that is beautiful.
How did you make that? Mold? Heat? English wheel?

Honda305.com Forum

honda305.com Forum

Front mudguard/fender

Front mudguard/fender

Front mudguard