Beginning Restoration

HondaPaul · Post by **HondaPaul** » Wed Jan 25, 2017 8:05 am

Glenn-N wrote:Great work.

Thanks Glenn, I got alot of help from the good folks on this board!

HondaPaul · Post by **HondaPaul** » Wed Feb 22, 2017 5:53 pm

Hi Everyone

Just another update. Things are moving along pretty good. All I have left to do before I start it (for the fist time in almost 40 years) is wire in the new rectifier, install the exhaust, and perform Ed's tune up procedure.

DSC00473 by Honda Paul, on Flickr

DSC00471 by Honda Paul, on Flickr

Glenn-N · Post by **Glenn-N** » Thu Feb 23, 2017 12:54 pm

Really good.
What paint did you use for the crankcase covers?

Still need to paint mine, I have VHT aluminium paint I'll be using probably.

HondaPaul · Post by **HondaPaul** » Fri Feb 24, 2017 7:17 am

Hi Glenn and thanks for the compliment!

I had Loudmouse go thru the motor. I believe he cleaned up the cases by simply bead blasting. He would be the better one to answer specifics.

Paul

OldScrambler · Post by **OldScrambler** » Fri Feb 24, 2017 8:42 pm

Paul..........You will likely need to partially or completely remove the rear fender to fit the rectifier.........unless you don't mind some paint scratches. Looking real sanitary! Ed's motor will likely start on the 2nd-kick.

HondaPaul · Post by **HondaPaul** » Sun Feb 26, 2017 11:06 am

Thanks Dennis! Decided to go with a solid state rectifier. Was having trouble finding a good one, and besides, I didn't care for how the original one dripped molten plastic all over the frame. No worries!

Paul

Glenn-N · Post by **Glenn-N** » Sun Jun 18, 2017 4:43 am

Any updates Paul? Already on the road?

Honda305.com Forum

honda305.com Forum

Beginning Restoration