New member with '66 CL77

Bee · Post by **Bee** » Thu May 04, 2017 9:03 am

bamacl wrote:Wrong bolts

Does anyone have a picture of the right bolt and mounting set up?

Glenn-N · Post by **Glenn-N** » Thu May 04, 2017 12:57 pm

Bee wrote:Sorry to jump your thread Glenn

No problem at all.

bamacl · Post by **bamacl** » Thu May 04, 2017 8:11 pm

Contact Ohio cycle , he can supply everything you need. Installation is a no-brainer.

LOUD MOUSE · Post by **LOUD MOUSE** » Thu May 04, 2017 8:16 pm

I have them and can't get the pic to load!!!!!!!!!!!!!. ...............lm

Bee wrote:
bamacl wrote:Wrong bolts
Does anyone have a picture of the right bolt and mounting set up?

Glenn-N · Post by **Glenn-N** » Sat May 20, 2017 2:09 pm

Easy job to replace this big oil seal (right side) without splitting the cases?

(Not my picture)

Mine is weeping a little bit but if it's an easy job I might replace it.

Glenn-N · Post by **Glenn-N** » Thu May 25, 2017 11:50 am

Still waiting for some parts but rolled her out a few days ago.
Starting to look the way I want.

Tim Allman · Post by **Tim Allman** » Thu May 25, 2017 5:51 pm

Glenn-N wrote:Easy job to replace this big oil seal (right side) without splitting the cases?

(Not my picture)

Mine is weeping a little bit but if it's an easy job I might replace it.

Yes, this is an easy job. The old ones can be pried out with a flat screwdriver. You can push the blade through the side of the seals with little force to give yourself something to grab. Slide the new ones in with some oil or grease, being careful not to damage the seals in the process.

The bike looks great!

Honda305.com Forum

honda305.com Forum

New member with '66 CL77