cl 300

G-Man · Post by **G-Man** » Tue Oct 24, 2017 5:35 am

Hi Rusty

Great looking project!

A little help with Flickr photos ......

When you are on this view. Click the arrow, circled.....

You get to this page. Select BBCode, select a sensible resolution - I find 800 x 600 works well.

Copy the highlighted text and then paste it into you post.

Good Luck....!

G

rustywrench wrote:Thank you all for the feedback. it is clear to see that since I don't have a title on this one the best I can expect is some nice parts to count on. I was hoping that the 300 series was a limited time import making it a rare find. I'll keep it around and maybe turn it into a logging road bike. Now on to setting up to post pics. Rusty

https://www.flickr.com/photos/153409479 ... res/HJnqTJ

https://flic.kr/p/YCXTZv
OK, it's a start. Still working on the process. Rusty

LOUD MOUSE · Post by **LOUD MOUSE** » Tue Oct 24, 2017 7:37 am

Were usually brought over bu GI'S.
Hard to tell.
Does the points cover read type1 or 2?.
If 2 can you show coil? ............lm

rustywrench wrote:Thank you all for the feedback. it is clear to see that since I don't have a title on this one the best I can expect is some nice parts to count on. I was hoping that the 300 series was a limited time import making it a rare find. I'll keep it around and maybe turn it into a logging road bike. Now on to setting up to post pics. Rusty

https://www.flickr.com/photos/153409479 ... res/HJnqTJ

https://flic.kr/p/YCXTZv
OK, it's a start. Still working on the process. Rusty

rustywrench · Post by **rustywrench** » Tue Oct 24, 2017 8:41 am

Thank you G, every step I take lately is a learning process.
Ed, I will be checking on that soon. Rusty
Ok this is as close as I can get.

DSCN0071 by kenneth zukowski, on Flickr

LOUD MOUSE · Post by **LOUD MOUSE** » Tue Oct 24, 2017 10:50 am

I see type1.
Does the harness show 1966?. ....................lm

rustywrench wrote:Thank you G, every step I take lately is a learning process.
Ed, I will be checking on that soon. Rusty
Ok this is as close as I can get.
DSCN0071 by kenneth zukowski, on Flickr
OOps I forgot to size it

rustywrench · Post by **rustywrench** » Tue Oct 24, 2017 7:21 pm

Yes I see that now so what I may have here is a hodge podge of different things. MPH speedo, type 1 eng, throttle/switch assembly has a l/R winker switch, then the wire harness leaves me a bit confused. What I do have is a lot of good parts to use elsewhere. Rusty

LOUD MOUSE · Post by **LOUD MOUSE** » Wed Oct 25, 2017 8:06 am

What's the engine number?. ............lm

rustywrench wrote:Yes I see that now so what I may have here is a hodge podge of different things. MPH speedo, type 1 eng, throttle/switch assembly has a l/R winker switch, then the wire harness leaves me a bit confused. What I do have is a lot of good parts to use elsewhere. Rusty

rustywrench · Post by **rustywrench** » Wed Oct 25, 2017 8:53 am

cl300E 1000175
Ed, if you could delete your post with my quote this thread will not be stretched any more. Just thinkin'. Rusty

honda305.com Forum

honda305.com Forum

cl 300

Re: cl 300

Re: cl 300

cl 300